-
Hydraulic Bottle Jack 20 TON- O.M.C.N 129
Hydraulic Bottle Jack 20 TON- O.M.C.N 129
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 3 TON- O.M.C.N 125
Hydraulic Bottle Jack 3 TON- O.M.C.N 125
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 5 TON- O.M.C.N 126
Hydraulic Bottle Jack 5 TON- O.M.C.N 126
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Press 100 TON- OMCN 160
Hydraulic Press 100 TON- OMCN 160
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Press 50 TON- OMCN 158
Hydraulic Press 50 TON- OMCN 158
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 15 TON- O.M.CN 123
Hydraulic Trolley Jack 15 TON- O.M.CN 123
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Equipped with foot-approaching control.
• Hand descent-control.
• Rubber covered support -
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:INFINITY 220 230V ACX
code 816082
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine – Telwin SUPERIOR 260 CE
Inverter Welding Machine – Telwin SUPERIOR 260 CE
inverter welding machine telwin, superior 260 ce 400v cod. 815503 with mma and tig-lift electrode in direct current (dc), designed for the welding of cellulose electrodes and coated electrodes of aluminum, rutile, basic, stainless steel, cast iron up to a diameter of 5 mm
-
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
Robust and impact resistant. -
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, cellulosic, etc.
Recommended for motor-generators, this model grants high performance despite power supply instability, thanks to the MPGE multi protections: control device of the waveform, filter against input peaks, stabilization of oscillations. Robust and impact resistant. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, and cellulosic. -
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
Welding Machine MMA Turbo ACD 230-400V – Telwin NORDICA 4.185MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with electrodes: rutile.
Complete with MMA welding accessories -
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
Welding Machine ACM 230V-400V MMA – Telwin NORDIKA 3250MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with a wide range of electrodes: rutile.
Complete with MMA welding accessories. -
OLEOMAC BRUSH CUTTER 1.0HP
Oleomac Brush Cutter 1.0HP
Sparta 250T
Lightweight brushcutters
– Power/Displacement 1.0 HP – 0.8 kW/25.4 cm³
– Cutting components 130 mm dia. Tap&Go head with 2.40 mm dia. line – 255 mm dia. disc with 3 blades
– Dry weight without cutting tools 6.2 kg -
OLEOMAC BRUSH CUTTER 2.0HP 0.60L 26MM BLADE
OLEOMAC BRUSH CUTTER 2.0HP
H series brushcuttersBCH 40 T / BCH 400 T
– Power/Displacement 2.0 HP – 1.5 kW/40.2 cm³
– Dry weight without cutting tools 8.1 kg (40 T) – 8.2 kg (400 T) -
OLEOMAC BRUSH CUTTER 2.1HP
Oleomac Brush Cutter 2.1HP
OM 741
Professional brushcutters
– Power/Displacement 2.1 HP – 1.6 kW/40.2 cm³
– Cutting components 130 mm dia. Load&Go head with 3.00 mm dia. line – 255 mm dia. disc with 3 blades
– Dry weight without cutting tools 7.9 kg -
OLEOMAC BRUSH CUTTER 2.1HP 0.87L 28MM ROPE
OLEOMAC BRUSH CUTTER 2.1HP
H series brushcuttersBCH 40 T / BCH 400 T
– Power/Displacement 2.0 HP – 1.5 kW/40.2 cm³
– Dry weight without cutting tools 8.1 kg (40 T) – 8.2 kg (400 T) -
OLEOMAC CHAINSAW 3.0HP
Oleomac Chainsaw 3.0HP
GSH 51 / GSH 510
H series chainsaws
– Power/Displacement 3.0 HP – 2.2 kW/50.9 cm³
– Bar length (nose) 16″-18″-20″, 41-46-51 cm, (sprocket)
– Dry weight without bar and chain 5.4 kg
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener