-
DIGITAL MODULAR 230
DIGITAL MODULAR 230
Microprocessor controlled spot welding machine. It implements a new Fuzzy logic control system that simplifies its use and increases the spot welding quality.
Suitable for spot welding of sheets with maximum thickness of 2+2mm. -
DTS700 SYSTEM-BATTERY DIGITAL TESTER
DTS700 SYSTEM-BATTERY DIGITAL TESTER
intelligent digital tester which allows not only the control of the charge status of a battery, but it also verifies the correct functioning of the starting and charging systems (alternator) of the vehicle’s battery. Extremely compact, handy, and easy-to-use, it enables us to operate with batteries (WET, GEL, AGM, PbCa) at 12V without disconnecting them from the vehicle, making the testing operations easy and quick to perform. The easy digital display and the led system provide the instant and precise viewing of the required information, allowing for efficient control of the batteries and the starting and charging systems. Besides, it is possible to select the reference standard used by the manufacturer of the batteries (EN, IEC, DIN, SAE, CA -MCA) to which various starting current ranges correspond: further confirmation of the wide range of use of this tool.
-
HUNTER AIR COMPRESSOR FOR CAR 4X4 12V 150PSI
HUNTER AIR COMPRESSOR FOR CAR 4X4 12V 150PSI
-
HUNTER AIR COMPRESSOR MINI FOR CAR 12V 150PSI
HUNTER AIR COMPRESSOR MINI FOR CAR 12V 150PSI
-
HUNTER HEX KEY SET, 9PCS TROX T10-T50
HUNTER HEX KEY SET, 9PCS TROX T10-T50
-
Hydraulic Bottle Jack 10 TON- O.M.C.N 127
Hydraulic Bottle Jack 10 TON- O.M.C.N 127
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 15 TON- O.M.C.N 128
Hydraulic Bottle Jack 15 TON- O.M.C.N 128
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 20 TON- O.M.C.N 129
Hydraulic Bottle Jack 20 TON- O.M.C.N 129
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 3 TON- O.M.C.N 125
Hydraulic Bottle Jack 3 TON- O.M.C.N 125
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 5 TON- O.M.C.N 126
Hydraulic Bottle Jack 5 TON- O.M.C.N 126
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Press 100 TON- OMCN 160
Hydraulic Press 100 TON- OMCN 160
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Press 50 TON- OMCN 158
Hydraulic Press 50 TON- OMCN 158
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 15 TON- O.M.CN 123
Hydraulic Trolley Jack 15 TON- O.M.CN 123
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Equipped with foot-approaching control.
• Hand descent-control.
• Rubber covered support -
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:INFINITY 220 230V ACX
code 816082
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine – Telwin SUPERIOR 260 CE
Inverter Welding Machine – Telwin SUPERIOR 260 CE
inverter welding machine telwin, superior 260 ce 400v cod. 815503 with mma and tig-lift electrode in direct current (dc), designed for the welding of cellulose electrodes and coated electrodes of aluminum, rutile, basic, stainless steel, cast iron up to a diameter of 5 mm
-
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
Robust and impact resistant. -
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, cellulosic, etc.
Recommended for motor-generators, this model grants high performance despite power supply instability, thanks to the MPGE multi protections: control device of the waveform, filter against input peaks, stabilization of oscillations. Robust and impact resistant. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, and cellulosic.
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener