-
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Equipped with foot-approaching control.
• Hand descent-control.
• Rubber covered support -
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
NAVIGATOR GASOLINE GEN 3.2KW 6.5HP 23L
NAVIGATOR GASOLINE GEN 3.2KW 6.5HP 23L
Navigator NG3500E2
Gasoline Generator 3.2 KW- Navigator NG3500E2Navigator Generator NG3500E2 is a cost-effective electric generator for your home or small business.
-
PIRANA 100L AIR COMPRESSOR 3HP ELECTRIC
PIRANA 100L AIR COMPRESSOR 3HP ELECTRIC
Model : MY2055/8
Motor : 2HP -
PIRANA 50L AIR COMPRESSOR 2HP ELECTRIC PI-50L-2HP
PIRANA 50L AIR COMPRESSOR 2HP ELECTRIC PI-50L-2HP
Model : ZC-0.12/8C
Motor : 2HP -
PROTECO SLIDING GATE KIT MOVER 4 24V 400KG
PROTECO SLIDING GATE KIT MOVER 4 24V 400KG
Proteco Mover – Sliding Gate MotorQUICK OVERVIEW
The Proteco Mover is a 230v or 380v electromechanical sliding gate motor system for automating gates weighing up to 1500kg and 13 metres in length. The 230v models have a duty cycle of 40% which is lower and means it is entirely suitable for single domestic properties but is unsuited to multi-dwelling or light commercial use. The 380v Mover 15T uses 3-phase power supply and is designed for light commercial use. The Mover uses a pinion (cog) drive mechanism in conjunction with toothed rack affixed to the gate to open and close the gate. The pinion is M4 profile (module 4) which is the industry standard for gates under 2000kg. -
PROTECO SWING GATE KIT LEADER 4 TI 230V 350KG
PROTECO SWING GATE KIT LEADER 4 TI 230V 350KG
Proteco Kit Leader 230v – Double Electric Swing Gate OpenersKEY FEATURES
– Ideal for wooden or metal 5 bar style gates
– Residential use only
– Easy and quick installation
– Inward/Outward opening
– Simple wiring & programming
– Wider opening angles (up to 110° depending on hinge position) -
REFLECTIVE VEST L-XL YELLOW SAFETY
REFLECTIVE VEST L-XL YELLOW SAFETY
Security Protection High Visibility Yellow Reflective Safety Vest -
TIGER 2.0KW GASOLINE GENERATOR
TIGER 2.0KW GASOLINE GENERATOR
Gasoline Generator 2.0 KW- Tiger TG2700This Tiger Gasoline Generator TM TG2700 has a maximum capacity of 2KVA. It is a one start pull Genset, fuel-efficient, and semi-silent with a gasoline fuel tank capacity of 15 liters and easy to maintain.
-
TIGER 2.5KW GASOLINE GENERATOR +BATTERY
TIGER 2.5KW GASOLINE GENERATOR +BATTERY
Gasoline Generator 2.5 KW- Tiger TG3700ETG3700E Gasoline generator is a 4-stroke, single-cylinder, air-cooled gasoline generator, rated output 2.5kva maximum power output 2.7kva. With an AC Frequency of 50 Hz, output voltage of 12V producing a rated AC output of 8.3A. Tiger range of products include engines, generators, and water pumps
-
TransPallet Jack 2 TON- O.M.C.N 149/M
TransPallet Jack 2 TON- O.M.C.N 149/M
• Professional forklifts.
• Sturdy oversized structure fully made of steel.
• Mechanical safety limit switch.
• Front linkage made of aluminium.
• “Man-standing by” descent control device with controlled speed.
• Safety valve to avoid any possible overload.
• Rear wheels made of aluminium, mounted on bearings.
• Double front rolls made of polyurethane.
• Rear wheels covered with polyurethane. -
TransPallet Jack 3 TON- O.M.C.N 223/M
TransPallet Jack 3 TON- O.M.C.N 223/M
• Professional forklifts.
• Sturdy oversized structure fully made of steel.
• Mechanical safety limit switch.
• Two models available: descent control by hand or foot.
• Front linkage made of aluminium.
• “Man-standing by” descent control device with controlled speed.
• Safety valve to avoid any possible overload.
• Rear wheels made of aluminium, mounted on bearings.
• Double front rolls made of polyurethane
• Rear wheels covered with polyurethane. -
Trolley Forklift 1 TON- OMCN 206/M
Trolley Forklift 1 TON- OMCN 206/M
Hand Pallet Truck 206/M
• Manual forklifts.
• Minimum height from the ground 90 mm only.
• Two-speed pump to lift quickly.
• Width-adjustable forks for the maximum versatility.
• Move easily thanks to big rear turning wheels equipped with a stationing brake.
• Front rolls made of polyurethane.
• “Man-standing by” descent control device with controlled speed.
• Great lifting height. -
Trolley Hydraulic Crane 1.5 TON- O.M.C.N SL/15
Trolley Hydraulic Crane 1.5 TON- O.M.C.N SL/15
• Ground chrome-plated rod for top reliability over time.
• Extendable arm in 4 working positions.
• Revolving rear wheels to move it easily.
• 360° revolving hook.
• Lateral tie-rods.
• Safety valve to avoid any possible overload.
• Descent control device with a controlled speed.
• Two-speed hydraulic pump.
• Polyurethane wheels.
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener