-
Hydraulic Press 100 TON- OMCN 160
Hydraulic Press 100 TON- OMCN 160
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Press 50 TON- OMCN 158
Hydraulic Press 50 TON- OMCN 158
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 15 TON- O.M.CN 123
Hydraulic Trolley Jack 15 TON- O.M.CN 123
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Equipped with foot-approaching control.
• Hand descent-control.
• Rubber covered support -
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:INFINITY 220 230V ACX
code 816082
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine – Telwin SUPERIOR 260 CE
Inverter Welding Machine – Telwin SUPERIOR 260 CE
inverter welding machine telwin, superior 260 ce 400v cod. 815503 with mma and tig-lift electrode in direct current (dc), designed for the welding of cellulose electrodes and coated electrodes of aluminum, rutile, basic, stainless steel, cast iron up to a diameter of 5 mm
-
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
Robust and impact resistant. -
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, cellulosic, etc.
Recommended for motor-generators, this model grants high performance despite power supply instability, thanks to the MPGE multi protections: control device of the waveform, filter against input peaks, stabilization of oscillations. Robust and impact resistant. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, and cellulosic. -
MILWAUKEE 18V 3/4 HIGH TORQUE IMPACT ONE KEY WRENCH WITH FRICTION RING
MILWAUKEE 18V 3/4 HIGH TORQUE IMPACT ONE KEY WRENCH WITH FRICTION RING
-
MILWAUKEE 18V COMPACT PERCUSSION DRILL FUEL 13MM LED
MILWAUKEE 18V COMPACT PERCUSSION DRILL FUEL 13MM LED
M18 FUEL™ 13mm Percussion Drill -
MILWAUKEE 18V H/D 4-MODE ROTARY SDS-PLUS HAMMER DRILL
MILWAUKEE 18V H/D 4-MODE ROTARY SDS-PLUS HAMMER DRILL
Milwaukee Rotary Hammer Drill 4-Mode 18V – HD18HX-0 -
MILWAUKEE ANGLE GRINDER 1000W 115MM 4.5 INCH M14
MILWAUKEE ANGLE GRINDER 1000W 115MM 4.5 INCH M14
AG 10-115 EK – Angle grinder 115 mm, 1000 W, slide switch -
MILWAUKEE ANGLE GRINDER 1250W 125MM 5 INCH EPOXY RESIN COATED FIELD HD BODY
MILWAUKEE ANGLE GRINDER 1250W 125MM 5 INCH
5″ Small Angle Grinder w/ Shroud Slide, Lock-On -
MILWAUKEE ANGLE GRINDER 2200W 230MM 9INCH M14
MILWAUKEE ANGLE GRINDER 2200W 230MM 9INCH M14
-
MILWAUKEE ANGLE GRINDER 2600W 230MM 9 INCH 68M/CUTTING DEPTH M14
MILWAUKEE ANGLE GRINDER 2600W 230MM 9 INCH 68M/CUTTING DEPTH M14
Powerful, 2600 W PROTECTOR-MOTOR with epoxy resin coated field and Heavy Duty winding protection for increased life time of tool -
MILWAUKEE AVIATION SNIP LEFT RED 260MM
MILWAUKEE AVIATION SNIP LEFT RED 260MM
Left Cutting Aviation Snips -
MILWAUKEE AVIATION SNIP RIGHT GREEN 260MM
MILWAUKEE AVIATION SNIP RIGHT GREEN 260MM
Right Cutting Aviation Snips -
MILWAUKEE AVIATION SNIP STRAIGHT YELLOW 260MM
MILWAUKEE AVIATION SNIP STRAIGHT YELLOW 260MM
Straight Cutting Aviation Snips -
MILWAUKEE BREAKING HAMMER 20KG CLASS 42J 28MM HEX BRUSHLESS + TROLLEY + 2 CHISELS
MILWAUKEE BREAKING HAMMER 20KG CLASS 42J 28MM HEX BRUSHLESS + TROLLEY + 2 CHISELS
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener