-
FILTER FOR FULL FACE MASK ABEKP3
FILTER FOR FULL FACE MASK ABEKP3
Filter for full face mask , ABEK-P3 Type -
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:INFINITY 220 230V ACX
code 816082
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine – Telwin SUPERIOR 260 CE
Inverter Welding Machine – Telwin SUPERIOR 260 CE
inverter welding machine telwin, superior 260 ce 400v cod. 815503 with mma and tig-lift electrode in direct current (dc), designed for the welding of cellulose electrodes and coated electrodes of aluminum, rutile, basic, stainless steel, cast iron up to a diameter of 5 mm
-
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
Robust and impact resistant. -
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, cellulosic, etc.
Recommended for motor-generators, this model grants high performance despite power supply instability, thanks to the MPGE multi protections: control device of the waveform, filter against input peaks, stabilization of oscillations. Robust and impact resistant. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, and cellulosic. -
ND-180 ELECTRIC TILES CUTTING MACHINE
ND-180 ELECTRIC TILES CUTTING MACHINE
Electric Cutter ND-180
Portable cutter, ideal for finishings and renovations. -
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
Welding Machine MMA Turbo ACD 230-400V – Telwin NORDICA 4.185MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with electrodes: rutile.
Complete with MMA welding accessories -
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
Welding Machine ACM 230V-400V MMA – Telwin NORDIKA 3250MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with a wide range of electrodes: rutile.
Complete with MMA welding accessories. -
PERIPHERIAL WATER PUMP 0.5HP
PERIPHERIAL WATER PUMP 0.5HP
Peripheral positive displacement pump with frontal suction for small household systems and simple industrial applications; characterised by a considerable ratio between performance and required output.
-
PERIPHERIAL WATER PUMP 0.75HP
PERIPHERIAL WATER PUMP 0.75HP
Peripheral positive displacement pump with frontal suction for small household systems and simple industrial applications; characterised by a considerable ratio between performance and required output.
-
PERIPHERIAL WATER PUMP 1HP
PERIPHERIAL WATER PUMP 1HP
Peripheral positive displacement pump with frontal suction for small household systems and simple industrial applications; characterised by a considerable ratio between performance and required output.
-
PRACTIC-61 TILES CUTTING MACHINE 24″ 61CM 43X43
PRACTIC-61 TILES CUTTING MACHINE 24″ 61CM 43X43
PRACTIC manual cutters
Ideal for small renovations and light work. -
PROTECO SLIDING GATE KIT MOVER 4 24V 400KG
PROTECO SLIDING GATE KIT MOVER 4 24V 400KG
Proteco Mover – Sliding Gate MotorQUICK OVERVIEW
The Proteco Mover is a 230v or 380v electromechanical sliding gate motor system for automating gates weighing up to 1500kg and 13 metres in length. The 230v models have a duty cycle of 40% which is lower and means it is entirely suitable for single domestic properties but is unsuited to multi-dwelling or light commercial use. The 380v Mover 15T uses 3-phase power supply and is designed for light commercial use. The Mover uses a pinion (cog) drive mechanism in conjunction with toothed rack affixed to the gate to open and close the gate. The pinion is M4 profile (module 4) which is the industry standard for gates under 2000kg. -
PROTECO SWING GATE KIT LEADER 4 TI 230V 350KG
PROTECO SWING GATE KIT LEADER 4 TI 230V 350KG
Proteco Kit Leader 230v – Double Electric Swing Gate OpenersKEY FEATURES
– Ideal for wooden or metal 5 bar style gates
– Residential use only
– Easy and quick installation
– Inward/Outward opening
– Simple wiring & programming
– Wider opening angles (up to 110° depending on hinge position) -
PX SUBMERSIBLE MOTOR ONLY 1.0HP 4L5-08
PX SUBMERSIBLE MOTOR ONLY 1.0HP 4L5-08
Submersible multistage centrifugal pumps for 4″ wells. Pump flange for coupling with motors provided according to NEMA standards. The most common applications are civil and agricultural
-
Rubi Electric Circular Saw 125MM With Guide – TC-125
Rubi Electric Circular Saw 125MM With Guide – TC-125
The TC-125 kit is part of the SLAB system for porcelain slabs and large format tiles and includes all the elements necessary for cutting, with the TC-125 circular saw, of these materials.
The kit includes:
– The circular cutter TC-125.
– 3 SLIM CUTTER guides of 110 cm, each. (For the proper functioning of the TC-125, it is NECESSARY, the use of these guides).
– Portable electric circular saw. Suitable for wet or dry cutting. -
Rubi Electric Circular Saw 180MM – TC-180
Rubi Electric Circular Saw 180MM – TC-180
The TC-180 circular saw is specially designed and suitable for cutting and rectifying large format pieces.
This power tool allows the user to reduce the handling of heavy or unwieldy parts. Thus achieving greater efficiency in the work of installing large format pieces.
The TC-180 circular saw works with 180 mm diameter diamond blades and is equipped to work in either wet cutting (hose connection) or dry cutting (vacuum cleaner connection).
-
Rubi Electric Tiles Cutter 1000W – DS-250-N
Rubi Electric Tiles Cutter 1000W – DS-250-N
RUBI offers the professional its range of DS-250-N Laser&level electric cutters and miter saws. A range of cutters with highly accurate mobile heads that are ideal for miter cuts.
Its powerful 3 hp motor makes the DS-250-N Laser&Level range by RUBI ideal for cutting and mitering of all types of ceramic tiles and especially porcelain tiles. Of course, the DS-250-N is also an ideal solution for cutting natural stones such as marble, granite, slate, etc.
-
Rubi Electric Tiles Cutter 1300W – DX-350-N
Rubi Electric Tiles Cutter 1300W – DX-350-N
The DX-350 N LASER&LEVEL is an electric cutter with a mobile head, equipped with a plunge effect to give professionals great versatility in cuts.
It is ideal for cutting all types of ceramic tile and building materials such as; marble, granite, bricks, facing, refractories, etc.
The DX-350 N has a motor assembly mounted on sliding bearings, offering the maximum precision and reliability that helps to obtain perfect finishes.
-
RUBIMIX-9-N MORTAR MIXER 1200W
RUBIMIX-9-N MORTAR MIXER 1200W
RUBIMIX-9 N mortar mixer
Versatility by changing the mixing paddle.Rubi Paint & Mortar Mixer 1200W – RUBIMIX-9 N
The RUBIMIX-9 N is an electric mixer noted for its versatility. By simply changing the mixing paddle, the RUBIMIX-9 N is perfectly suited to mixing cement adhesives, resins, paints, and other materials. Its double grip with bi-material handles has improved ergonomics and provided a greater user comfort. -
SAFETY BELT + 2 SHOCK ABSORBER 31A+2*30
SAFETY BELT + 2 SHOCK ABSORBER 31A+2*30
Shock absorber for safety harness -
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener