-
DALLAS ELECTRODE HOLDER 400A BL
DALLAS ELECTRODE HOLDER 400A BL
Electrode Holder- Telwin Dallas Electrode -
DIGITAL MODULAR 230
DIGITAL MODULAR 230
Microprocessor controlled spot welding machine. It implements a new Fuzzy logic control system that simplifies its use and increases the spot welding quality.
Suitable for spot welding of sheets with maximum thickness of 2+2mm. -
DTS700 SYSTEM-BATTERY DIGITAL TESTER
DTS700 SYSTEM-BATTERY DIGITAL TESTER
intelligent digital tester which allows not only the control of the charge status of a battery, but it also verifies the correct functioning of the starting and charging systems (alternator) of the vehicle’s battery. Extremely compact, handy, and easy-to-use, it enables us to operate with batteries (WET, GEL, AGM, PbCa) at 12V without disconnecting them from the vehicle, making the testing operations easy and quick to perform. The easy digital display and the led system provide the instant and precise viewing of the required information, allowing for efficient control of the batteries and the starting and charging systems. Besides, it is possible to select the reference standard used by the manufacturer of the batteries (EN, IEC, DIN, SAE, CA -MCA) to which various starting current ranges correspond: further confirmation of the wide range of use of this tool.
-
-
FILTER FOR FULL FACE MASK ABEKP3
FILTER FOR FULL FACE MASK ABEKP3
Filter for full face mask , ABEK-P3 Type -
GASOLINE WATER PUMP 3″ DAISHIN ENGINE
GASOLINE WATER PUMP 3″ DAISHIN ENGINE
SCR-80HG -
GASOLINE WATER PUMP 3″ HONDA ENGINE
GASOLINE WATER PUMP 3″HONDA ENGINE
SCR-80HX -
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:INFINITY 220 230V ACX
code 816082
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine – Telwin SUPERIOR 260 CE
Inverter Welding Machine – Telwin SUPERIOR 260 CE
inverter welding machine telwin, superior 260 ce 400v cod. 815503 with mma and tig-lift electrode in direct current (dc), designed for the welding of cellulose electrodes and coated electrodes of aluminum, rutile, basic, stainless steel, cast iron up to a diameter of 5 mm
-
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
Robust and impact resistant. -
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, cellulosic, etc.
Recommended for motor-generators, this model grants high performance despite power supply instability, thanks to the MPGE multi protections: control device of the waveform, filter against input peaks, stabilization of oscillations. Robust and impact resistant. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, and cellulosic. -
JIGSAW TOP HANDLE 700W
Model number : STEP80
– Tophandle jigsaw with a new powerful 700 watt motor
– 6-different speed settings for better cutting control
– Better ergonomic design with integrated soft-grip
– Dust extraction port -
MILWAUKEE 18V 3/4 HIGH TORQUE IMPACT ONE KEY WRENCH WITH FRICTION RING
MILWAUKEE 18V 3/4 HIGH TORQUE IMPACT ONE KEY WRENCH WITH FRICTION RING
-
MILWAUKEE 18V COMPACT PERCUSSION DRILL FUEL 13MM LED
MILWAUKEE 18V COMPACT PERCUSSION DRILL FUEL 13MM LED
M18 FUEL™ 13mm Percussion Drill -
MILWAUKEE 18V H/D 4-MODE ROTARY SDS-PLUS HAMMER DRILL
MILWAUKEE 18V H/D 4-MODE ROTARY SDS-PLUS HAMMER DRILL
Milwaukee Rotary Hammer Drill 4-Mode 18V – HD18HX-0 -
MILWAUKEE ANGLE GRINDER 1000W 115MM 4.5 INCH M14
MILWAUKEE ANGLE GRINDER 1000W 115MM 4.5 INCH M14
AG 10-115 EK – Angle grinder 115 mm, 1000 W, slide switch -
MILWAUKEE ANGLE GRINDER 1250W 125MM 5 INCH EPOXY RESIN COATED FIELD HD BODY
MILWAUKEE ANGLE GRINDER 1250W 125MM 5 INCH
5″ Small Angle Grinder w/ Shroud Slide, Lock-On -
MILWAUKEE ANGLE GRINDER 2200W 230MM 9INCH M14
MILWAUKEE ANGLE GRINDER 2200W 230MM 9INCH M14
-
MILWAUKEE ANGLE GRINDER 2600W 230MM 9 INCH 68M/CUTTING DEPTH M14
MILWAUKEE ANGLE GRINDER 2600W 230MM 9 INCH 68M/CUTTING DEPTH M14
Powerful, 2600 W PROTECTOR-MOTOR with epoxy resin coated field and Heavy Duty winding protection for increased life time of tool -
MILWAUKEE AVIATION SNIP LEFT RED 260MM
MILWAUKEE AVIATION SNIP LEFT RED 260MM
Left Cutting Aviation Snips -
MILWAUKEE AVIATION SNIP RIGHT GREEN 260MM
MILWAUKEE AVIATION SNIP RIGHT GREEN 260MM
Right Cutting Aviation Snips
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener