-
Hydraulic Press 100 TON- OMCN 160
Hydraulic Press 100 TON- OMCN 160
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Press 50 TON- OMCN 158
Hydraulic Press 50 TON- OMCN 158
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 15 TON- O.M.CN 123
Hydraulic Trolley Jack 15 TON- O.M.CN 123
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Equipped with foot-approaching control.
• Hand descent-control.
• Rubber covered support -
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:INFINITY 220 230V ACX
code 816082
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine – Telwin SUPERIOR 260 CE
Inverter Welding Machine – Telwin SUPERIOR 260 CE
inverter welding machine telwin, superior 260 ce 400v cod. 815503 with mma and tig-lift electrode in direct current (dc), designed for the welding of cellulose electrodes and coated electrodes of aluminum, rutile, basic, stainless steel, cast iron up to a diameter of 5 mm
-
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
Robust and impact resistant. -
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, cellulosic, etc.
Recommended for motor-generators, this model grants high performance despite power supply instability, thanks to the MPGE multi protections: control device of the waveform, filter against input peaks, stabilization of oscillations. Robust and impact resistant. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, and cellulosic. -
-
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
Welding Machine MMA Turbo ACD 230-400V – Telwin NORDICA 4.185MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with electrodes: rutile.
Complete with MMA welding accessories -
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
Welding Machine ACM 230V-400V MMA – Telwin NORDIKA 3250MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with a wide range of electrodes: rutile.
Complete with MMA welding accessories. -
SPRINTER 4000 START 12-24V 230V BATTERY CHARGER
SPRINTER 4000 START 12-24V 230V BATTERY CHARGER
Battery Charger 12-24V 230V- Telwin Sprinter 4000 StartBattery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans, and light trucks.
-
SPRINTER 6000 START 12-24V 230V BATTERY CHARGER
SPRINTER 6000 START 12-24V 230V BATTERY CHARGER
SPRINTER 6000 START 230V 12-24V
code 829392Battery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans and light trucks.
-
SUPERIOR 245 INVERTER WELDING MACHINE
SUPERIOR 245 INVERTER WELIDNG MACHINE
Inverter Welding Machine – Telwin SUPERIOR 245MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking. Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
-
SUPERPLASMA 130
SUPERPLASMA 130
Compressed air plasma cutting system with high-frequency HF striking of pilot arc. Allows a rapid, distortion-proof cutting of all conductive materials such as steel, stainless steel, galvanized steel, aluminium, copper, brass, etc. Possibility to use long nozzles. Features:- 2 positions for the regulation of cutting current- control devices for torch under-voltage, air pressure, torch short circuit, phase failure, thermostatic protection- possibility to cut on grids with an automatic restart of pilot arc (self restart)- visualization of air pressure.Complete with the torch.
-
TransPallet Jack 2 TON- O.M.C.N 149/M
TransPallet Jack 2 TON- O.M.C.N 149/M
• Professional forklifts.
• Sturdy oversized structure fully made of steel.
• Mechanical safety limit switch.
• Front linkage made of aluminium.
• “Man-standing by” descent control device with controlled speed.
• Safety valve to avoid any possible overload.
• Rear wheels made of aluminium, mounted on bearings.
• Double front rolls made of polyurethane.
• Rear wheels covered with polyurethane. -
TransPallet Jack 3 TON- O.M.C.N 223/M
TransPallet Jack 3 TON- O.M.C.N 223/M
• Professional forklifts.
• Sturdy oversized structure fully made of steel.
• Mechanical safety limit switch.
• Two models available: descent control by hand or foot.
• Front linkage made of aluminium.
• “Man-standing by” descent control device with controlled speed.
• Safety valve to avoid any possible overload.
• Rear wheels made of aluminium, mounted on bearings.
• Double front rolls made of polyurethane
• Rear wheels covered with polyurethane. -
Trolley Forklift 1 TON- OMCN 206/M
Trolley Forklift 1 TON- OMCN 206/M
Hand Pallet Truck 206/M
• Manual forklifts.
• Minimum height from the ground 90 mm only.
• Two-speed pump to lift quickly.
• Width-adjustable forks for the maximum versatility.
• Move easily thanks to big rear turning wheels equipped with a stationing brake.
• Front rolls made of polyurethane.
• “Man-standing by” descent control device with controlled speed.
• Great lifting height. -
Trolley Hydraulic Crane 1.5 TON- O.M.C.N SL/15
Trolley Hydraulic Crane 1.5 TON- O.M.C.N SL/15
• Ground chrome-plated rod for top reliability over time.
• Extendable arm in 4 working positions.
• Revolving rear wheels to move it easily.
• 360° revolving hook.
• Lateral tie-rods.
• Safety valve to avoid any possible overload.
• Descent control device with a controlled speed.
• Two-speed hydraulic pump.
• Polyurethane wheels.
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener