-
DIGITAL MODULAR 230
DIGITAL MODULAR 230
Microprocessor controlled spot welding machine. It implements a new Fuzzy logic control system that simplifies its use and increases the spot welding quality.
Suitable for spot welding of sheets with maximum thickness of 2+2mm. -
DTS700 SYSTEM-BATTERY DIGITAL TESTER
DTS700 SYSTEM-BATTERY DIGITAL TESTER
intelligent digital tester which allows not only the control of the charge status of a battery, but it also verifies the correct functioning of the starting and charging systems (alternator) of the vehicle’s battery. Extremely compact, handy, and easy-to-use, it enables us to operate with batteries (WET, GEL, AGM, PbCa) at 12V without disconnecting them from the vehicle, making the testing operations easy and quick to perform. The easy digital display and the led system provide the instant and precise viewing of the required information, allowing for efficient control of the batteries and the starting and charging systems. Besides, it is possible to select the reference standard used by the manufacturer of the batteries (EN, IEC, DIN, SAE, CA -MCA) to which various starting current ranges correspond: further confirmation of the wide range of use of this tool.
-
GGA AIR COMPRESSOR 100L GG470
GGA AIR COMPRESSOR 100L GG470
230V 2HP 254L/MIN 8BAR -
GGA AIR COMPRESSOR 200L GG520
GGA AIR COMPRESSOR 200L GG520
230V 3HP 360L/MIN 8BAR -
-
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:INFINITY 220 230V ACX
code 816082
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine – Telwin SUPERIOR 260 CE
Inverter Welding Machine – Telwin SUPERIOR 260 CE
inverter welding machine telwin, superior 260 ce 400v cod. 815503 with mma and tig-lift electrode in direct current (dc), designed for the welding of cellulose electrodes and coated electrodes of aluminum, rutile, basic, stainless steel, cast iron up to a diameter of 5 mm
-
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
Robust and impact resistant. -
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, cellulosic, etc.
Recommended for motor-generators, this model grants high performance despite power supply instability, thanks to the MPGE multi protections: control device of the waveform, filter against input peaks, stabilization of oscillations. Robust and impact resistant. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, and cellulosic. -
JIGSAW TOP HANDLE 700W
Model number : STEP80
– Tophandle jigsaw with a new powerful 700 watt motor
– 6-different speed settings for better cutting control
– Better ergonomic design with integrated soft-grip
– Dust extraction port -
MITRE SAW – 2000W 254MM
Model number : PS 254 L
Internal fan that removes 80% of the dust
Cut line visibility – Adjustable LED and laser
Blade depth adjustment. Allows for trenching application
Mitre lock with detent plate. Mitre: 50 left or right -
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
Welding Machine MMA Turbo ACD 230-400V – Telwin NORDICA 4.185MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with electrodes: rutile.
Complete with MMA welding accessories -
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
Welding Machine ACM 230V-400V MMA – Telwin NORDIKA 3250MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with a wide range of electrodes: rutile.
Complete with MMA welding accessories. -
PL 750 PLANER
Weight : 4.04 kg
Cutting width : 12 Millimetres
– Ejection of the chip to the left and right
– Depth adjustment in 0.2 mm scales.
– The rear flange protects the base.
– 750 watts with 82 mm working width.
– Infinitely adjustable cutting depth -
PLUNGE ROUTER, 1350W, 50MM
Plunge Router – 1350W, 50MM
– Powerful 1350 watt motor
– Soft Start for greater user control & safety
– Full Wave Electronics giving user constant speed
– AccuStop
– Plunge Capacity : 50mm -
ROBIN COMPACTOR DIESEL GA170F 90KG
ROBIN COMPACTOR DIESEL GA170F 90KG
Robin – Plate CompactorFEATURES:
Robin- plate compactor is widely used in building and road construction.
There is no adequate dynamic theory exists to predict vital performance characteristics such as frequency of impacts, speed of forward travel, power delivered to the soil, etc.
It is found that the forward speed and power delivered to the soil are sensitive functions of the ratio of exciting force to dead weight.
The power delivered to the soil tends to be a maximum when the exciting force is approximately twice the dead weight.
It is shown that for certain values of system parameters, it is possible to have periodic behaviour of the system where the period of the motion is an integer multiple of the period of the exciting force. -
ROBIN COMPACTOR PETROL EY20 90KG
ROBIN COMPACTOR DIESEL GA170F 90KG
Robin – Plate CompactorFEATURES:
Robin- plate compactor is widely used in building and road construction.
There is no adequate dynamic theory exists to predict vital performance characteristics such as frequency of impacts, speed of forward travel, power delivered to the soil, etc.
It is found that the forward speed and power delivered to the soil are sensitive functions of the ratio of exciting force to dead weight.
The power delivered to the soil tends to be a maximum when the exciting force is approximately twice the dead weight.
It is shown that for certain values of system parameters, it is possible to have periodic behaviour of the system where the period of the motion is an integer multiple of the period of the exciting force. -
ROBIN CONCRETE VIBRATOR EY20 EXEN + HOSE
ROBIN CONCRETE VIBRATOR EY20 EXEN + HOSE
Robin Engine Concrete Vibrator is widely used in a variety of building purposes and concrete foundation work such as road, bridge and tunnel.it is an indispensable tool in concrete spot in distant area without electricity or when there is black out.
-
ROBIN POWER TROWEL EY20 350MM BLADE
ROBIN POWER TROWEL EY20 350MM BLADE
Power Trowel with Robin Ey20 Engine and 5hp Power Icom -
SDS-MAX BREAKER 5KG 7.5J 1100W
Model number : MH 5G
– Powerful 1100 watt motor
– 7.5J EPTA blow energy
– 2 mode SDS-Max chipping hammer
– Multi position chisel function gives 12 different positions to optimize working angle -
SDS-MAX COMBI HAMMER 1100W 40MM 7.5J
Model number : KH 5G
– Powerful 1100 watt motor
– 7.5J EPTA blow energy
– 40mm drilling capacity in concrete
– Rotary stop for chiselling applications -
SDS-PLUS COMBI HAMMER 1010W 28MM FIXTEC
Model number : KH 28 Super XE
– Powerful 1010 watt motor
– 28mm drilling capacity in concrete
– Rotary stop for light chiselling applications
– Soft hammer mode reduces blow energy and speed for drilling/chiselling in sensitive materials
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener