-
SELF-PRIMING INOX WATER PUMP 1HP
SELF-PRIMING INOX WATER PUMP 1HP
Self-priming centrifugal pump for domestic applications such as domestic systems where air is mixed with water. Recommended in combination with pressure set for water transfer, rainwater harvesting and garden irrigation systems
-
SELF-PRIMING WATER PUMP 1.5HP LONG
SELF-PRIMING WATER PUMP 1.5HP LONG
Self-priming centrifugal pump for water supplies (even if mixed with gas) in small household systems, connected to autoclave tanks, for transferring liquids and emptying tanks; also used for gardening
-
SELF-PRIMING WATER PUMP 1.5HP SHORT
SELF-PRIMING WATER PUMP 1.5HP SHORT
Self-priming centrifugal pump for water supplies (even if mixed with gas) in small household systems, connected to autoclave tanks, for transferring liquids and emptying tanks; also used for gardening
-
SELF-PRIMING WATER PUMP 1HP
SELF-PRIMING WATER PUMP 1HP
Self-priming centrifugal pump for water supplies (even if mixed with gas) in small household systems, connected to autoclave tanks, for transferring liquids and emptying tanks; also used for gardening
-
SELF-PRIMING WATER PUMP 2HP
SELF-PRIMING WATER PUMP 2HP
Self-priming centrifugal pump for water supplies (even if mixed with gas) in small household systems, connected to autoclave tanks, for transferring liquids and emptying tanks; also used for gardening
-
SPHERIC BOOSTER 24L SEBAT
SPHERIC BOOSTER 24L SEBAT
Pentax – Booster Pump Cylinder Tank 24L -
STRAFIX DECORATIVE PLASTER C30 FINE WHITE 25KG
STRAFIX DECORATIVE PLASTER C30 FINE WHITE 25KG
Decorative Plaster 15 – Mineral Textured – White (Fine)DESCRIPTION:
White cement based, single component, polymer added, decorative facade top coat which has 1.5 mm mineral granular texture and is applied with a trowel. -
SUBMERSIBLE PUMP 1.5HP LONG 4INCH
SUBMERSIBLE PUMP 1.5HP LONG 4INCH
Multistage centrifugal submersible pumps for 4 ”wells. Motor coupling flange prepared according to NEMA regulations. The main uses include civil and agricultural applications.
-
SUBMERSIBLE PUMP 2HP LONG 4INCH (4S100-18A)
SUBMERSIBLE PUMP 2HP LONG 4INCH (4S100-18A)
Multistage centrifugal submersible pumps for 4 ”wells. Motor coupling flange prepared according to NEMA regulations. The main uses include civil and agricultural applications.
-
SUBMERSIBLE PUMP 3HP LONG 4INCH
SUBMERSIBLE PUMP 3HP LONG 4INCH
Pompe sommerse centrifughe multistadio per pozzi da 4”. Flangia di accoppiamento al motore predisposta secondo le normative NEMA. Gli impieghi principali comprendono le applicazioni civili e agricole.
-
SWIMMING POOL WATER PUMP 1.5HP
SWIMMING POOL WATER PUMP 1.5HP
PENTAX WINNER 150MPeripheral positive displacement pump with frontal suction for small household systems and simple industrial applications; characterised by a considerable ratio between performance and required output.
-
TIGER 2.0KW GASOLINE GENERATOR
TIGER 2.0KW GASOLINE GENERATOR
Gasoline Generator 2.0 KW- Tiger TG2700This Tiger Gasoline Generator TM TG2700 has a maximum capacity of 2KVA. It is a one start pull Genset, fuel-efficient, and semi-silent with a gasoline fuel tank capacity of 15 liters and easy to maintain.
-
TIGER 2.5KW GASOLINE GENERATOR +BATTERY
TIGER 2.5KW GASOLINE GENERATOR +BATTERY
Gasoline Generator 2.5 KW- Tiger TG3700ETG3700E Gasoline generator is a 4-stroke, single-cylinder, air-cooled gasoline generator, rated output 2.5kva maximum power output 2.7kva. With an AC Frequency of 50 Hz, output voltage of 12V producing a rated AC output of 8.3A. Tiger range of products include engines, generators, and water pumps
-
TransPallet Jack 2 TON- O.M.C.N 149/M
TransPallet Jack 2 TON- O.M.C.N 149/M
• Professional forklifts.
• Sturdy oversized structure fully made of steel.
• Mechanical safety limit switch.
• Front linkage made of aluminium.
• “Man-standing by” descent control device with controlled speed.
• Safety valve to avoid any possible overload.
• Rear wheels made of aluminium, mounted on bearings.
• Double front rolls made of polyurethane.
• Rear wheels covered with polyurethane. -
TransPallet Jack 3 TON- O.M.C.N 223/M
TransPallet Jack 3 TON- O.M.C.N 223/M
• Professional forklifts.
• Sturdy oversized structure fully made of steel.
• Mechanical safety limit switch.
• Two models available: descent control by hand or foot.
• Front linkage made of aluminium.
• “Man-standing by” descent control device with controlled speed.
• Safety valve to avoid any possible overload.
• Rear wheels made of aluminium, mounted on bearings.
• Double front rolls made of polyurethane
• Rear wheels covered with polyurethane. -
Trolley Forklift 1 TON- OMCN 206/M
Trolley Forklift 1 TON- OMCN 206/M
Hand Pallet Truck 206/M
• Manual forklifts.
• Minimum height from the ground 90 mm only.
• Two-speed pump to lift quickly.
• Width-adjustable forks for the maximum versatility.
• Move easily thanks to big rear turning wheels equipped with a stationing brake.
• Front rolls made of polyurethane.
• “Man-standing by” descent control device with controlled speed.
• Great lifting height. -
Trolley Hydraulic Crane 1.5 TON- O.M.C.N SL/15
Trolley Hydraulic Crane 1.5 TON- O.M.C.N SL/15
• Ground chrome-plated rod for top reliability over time.
• Extendable arm in 4 working positions.
• Revolving rear wheels to move it easily.
• 360° revolving hook.
• Lateral tie-rods.
• Safety valve to avoid any possible overload.
• Descent control device with a controlled speed.
• Two-speed hydraulic pump.
• Polyurethane wheels. -
WELDING HELMET 405-CPA 110*55
WELDING HELMET 405-CPA 110*55
Welding helmet 405 CPA -
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener