-
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
Robust and impact resistant. -
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, cellulosic, etc.
Recommended for motor-generators, this model grants high performance despite power supply instability, thanks to the MPGE multi protections: control device of the waveform, filter against input peaks, stabilization of oscillations. Robust and impact resistant. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, and cellulosic. -
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
Welding Machine MMA Turbo ACD 230-400V – Telwin NORDICA 4.185MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with electrodes: rutile.
Complete with MMA welding accessories -
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
Welding Machine ACM 230V-400V MMA – Telwin NORDIKA 3250MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with a wide range of electrodes: rutile.
Complete with MMA welding accessories. -
PRESSURE WASHER 2200PSI 150BAR PETROL
PRESSURE WASHER 2200PSI 150BAR PETROL
-
PRESSURE WASHER 2300PSI 160BAR PETROL
PRESSURE WASHER 2300PSI 160BAR PETROL
-
PRESSURE WASHER 3200PSI 220BAR PETROL
PRESSURE WASHER 3200PSI 220BAR PETROL
-
PRESSURE WASHER ELECTRIC 1750PSI 120BAR 3PH
PRESSURE WASHER ELECTRIC 1750PSI 120BAR 3PH
₵1.00 -
SPRINTER 4000 START 12-24V 230V BATTERY CHARGER
SPRINTER 4000 START 12-24V 230V BATTERY CHARGER
Battery Charger 12-24V 230V- Telwin Sprinter 4000 StartBattery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans, and light trucks.
-
SPRINTER 6000 START 12-24V 230V BATTERY CHARGER
SPRINTER 6000 START 12-24V 230V BATTERY CHARGER
SPRINTER 6000 START 230V 12-24V
code 829392Battery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans and light trucks.
-
SUPERIOR 245 INVERTER WELDING MACHINE
SUPERIOR 245 INVERTER WELIDNG MACHINE
Inverter Welding Machine – Telwin SUPERIOR 245MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking. Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
-
SUPERPLASMA 130
SUPERPLASMA 130
Compressed air plasma cutting system with high-frequency HF striking of pilot arc. Allows a rapid, distortion-proof cutting of all conductive materials such as steel, stainless steel, galvanized steel, aluminium, copper, brass, etc. Possibility to use long nozzles. Features:- 2 positions for the regulation of cutting current- control devices for torch under-voltage, air pressure, torch short circuit, phase failure, thermostatic protection- possibility to cut on grids with an automatic restart of pilot arc (self restart)- visualization of air pressure.Complete with the torch.
-
TEA ELEVATOR HOIST HE301MF-H40 (300KG – 1PH)
TEA ELEVATOR HOIST HE301MF-H40 (300KG – 1PH)
-
TEA ELEVATOR HOIST HE501MF-H40 (500KG – 3PH)
TEA ELEVATOR HOIST HE501MF-H40 (500KG – 3PH)
-
TransPallet Jack 2 TON- O.M.C.N 149/M
TransPallet Jack 2 TON- O.M.C.N 149/M
• Professional forklifts.
• Sturdy oversized structure fully made of steel.
• Mechanical safety limit switch.
• Front linkage made of aluminium.
• “Man-standing by” descent control device with controlled speed.
• Safety valve to avoid any possible overload.
• Rear wheels made of aluminium, mounted on bearings.
• Double front rolls made of polyurethane.
• Rear wheels covered with polyurethane. -
TransPallet Jack 3 TON- O.M.C.N 223/M
TransPallet Jack 3 TON- O.M.C.N 223/M
• Professional forklifts.
• Sturdy oversized structure fully made of steel.
• Mechanical safety limit switch.
• Two models available: descent control by hand or foot.
• Front linkage made of aluminium.
• “Man-standing by” descent control device with controlled speed.
• Safety valve to avoid any possible overload.
• Rear wheels made of aluminium, mounted on bearings.
• Double front rolls made of polyurethane
• Rear wheels covered with polyurethane. -
Trolley Forklift 1 TON- OMCN 206/M
Trolley Forklift 1 TON- OMCN 206/M
Hand Pallet Truck 206/M
• Manual forklifts.
• Minimum height from the ground 90 mm only.
• Two-speed pump to lift quickly.
• Width-adjustable forks for the maximum versatility.
• Move easily thanks to big rear turning wheels equipped with a stationing brake.
• Front rolls made of polyurethane.
• “Man-standing by” descent control device with controlled speed.
• Great lifting height. -
Trolley Hydraulic Crane 1.5 TON- O.M.C.N SL/15
Trolley Hydraulic Crane 1.5 TON- O.M.C.N SL/15
• Ground chrome-plated rod for top reliability over time.
• Extendable arm in 4 working positions.
• Revolving rear wheels to move it easily.
• 360° revolving hook.
• Lateral tie-rods.
• Safety valve to avoid any possible overload.
• Descent control device with a controlled speed.
• Two-speed hydraulic pump.
• Polyurethane wheels. -
Welding Machine 230-400V MMA AC – Telwin EURARC 422 ACX
Welding Machine 230-400V MMA AC – Telwin EURARC 422 ACX
MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
The model has a double secondary voltage for use also with basic and rutile electrodes. -
Welding Machine 230V MAXIMA 230 SYNERGIC
Welding Machine 230V MAXIMA 230 SYNERGIC
Microprocessor controlled MIG-MAG/FLUX/BRAZING/MMA/TIG DC- LIFT inverter wire welding machine.
It allows great versatility in the use of various types of materials (steel, stainless steel, aluminium) and in all possible applications, from maintenance to installation works.
The SYNERGIC adjustment of the welding parameters makes the products easy to use and grants excellent results, always, also for the less experienced operator.
Light and compact, it can be easily carried in any intervention place, both inside and outside.
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener