-
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Press 100 TON- OMCN 160
Hydraulic Press 100 TON- OMCN 160
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Press 50 TON- OMCN 158
Hydraulic Press 50 TON- OMCN 158
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 15 TON- O.M.CN 123
Hydraulic Trolley Jack 15 TON- O.M.CN 123
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Equipped with foot-approaching control.
• Hand descent-control.
• Rubber covered support -
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
JIGSAW TOP HANDLE 700W
Model number : STEP80
– Tophandle jigsaw with a new powerful 700 watt motor
– 6-different speed settings for better cutting control
– Better ergonomic design with integrated soft-grip
– Dust extraction port -
MITRE SAW – 2000W 254MM
Model number : PS 254 L
Internal fan that removes 80% of the dust
Cut line visibility – Adjustable LED and laser
Blade depth adjustment. Allows for trenching application
Mitre lock with detent plate. Mitre: 50 left or right -
PL 750 PLANER
Weight : 4.04 kg
Cutting width : 12 Millimetres
– Ejection of the chip to the left and right
– Depth adjustment in 0.2 mm scales.
– The rear flange protects the base.
– 750 watts with 82 mm working width.
– Infinitely adjustable cutting depth -
PLUNGE ROUTER, 1350W, 50MM
Plunge Router – 1350W, 50MM
– Powerful 1350 watt motor
– Soft Start for greater user control & safety
– Full Wave Electronics giving user constant speed
– AccuStop
– Plunge Capacity : 50mm -
PROTECO SLIDING GATE KIT MOVER 4 24V 400KG
PROTECO SLIDING GATE KIT MOVER 4 24V 400KG
Proteco Mover – Sliding Gate MotorQUICK OVERVIEW
The Proteco Mover is a 230v or 380v electromechanical sliding gate motor system for automating gates weighing up to 1500kg and 13 metres in length. The 230v models have a duty cycle of 40% which is lower and means it is entirely suitable for single domestic properties but is unsuited to multi-dwelling or light commercial use. The 380v Mover 15T uses 3-phase power supply and is designed for light commercial use. The Mover uses a pinion (cog) drive mechanism in conjunction with toothed rack affixed to the gate to open and close the gate. The pinion is M4 profile (module 4) which is the industry standard for gates under 2000kg. -
PROTECO SWING GATE KIT LEADER 4 TI 230V 350KG
PROTECO SWING GATE KIT LEADER 4 TI 230V 350KG
Proteco Kit Leader 230v – Double Electric Swing Gate OpenersKEY FEATURES
– Ideal for wooden or metal 5 bar style gates
– Residential use only
– Easy and quick installation
– Inward/Outward opening
– Simple wiring & programming
– Wider opening angles (up to 110° depending on hinge position) -
REFLECTIVE VEST L-XL YELLOW SAFETY
REFLECTIVE VEST L-XL YELLOW SAFETY
Security Protection High Visibility Yellow Reflective Safety Vest -
SDS-MAX BREAKER 5KG 7.5J 1100W
Model number : MH 5G
– Powerful 1100 watt motor
– 7.5J EPTA blow energy
– 2 mode SDS-Max chipping hammer
– Multi position chisel function gives 12 different positions to optimize working angle -
SDS-MAX COMBI HAMMER 1100W 40MM 7.5J
Model number : KH 5G
– Powerful 1100 watt motor
– 7.5J EPTA blow energy
– 40mm drilling capacity in concrete
– Rotary stop for chiselling applications -
SDS-PLUS COMBI HAMMER 1010W 28MM FIXTEC
Model number : KH 28 Super XE
– Powerful 1010 watt motor
– 28mm drilling capacity in concrete
– Rotary stop for light chiselling applications
– Soft hammer mode reduces blow energy and speed for drilling/chiselling in sensitive materials -
SDS-PLUS COMBI HAMMER 720W
Model Number : KH 24IE
– Powerful 800 watt motor
– n24mm drilling capacity in concrete
– Rotary stop for light chiselling applications
– Safety cluch for user protection -
SDS-PLUS COMBI HAMMER 800W
Model number : KH 26E
– Powerful 800 watt motor
– 26mm drilling capacity in concrete
– Rotary stop for light chiselling applications
– Safety clutch for user protection -
-
TABLE SAW 1800W
Model number : TS250K
– Powerful 1800 W 4800 RPM motor
– Table size with extensions 745 x 1020 mm
– 90mm cutting depth (53mm to 45º).
– Disc diameter 254×30.
– Includes: 36 teeth TCT disc, cutting guide, miter guide. -
TIGER 2.0KW GASOLINE GENERATOR
TIGER 2.0KW GASOLINE GENERATOR
Gasoline Generator 2.0 KW- Tiger TG2700This Tiger Gasoline Generator TM TG2700 has a maximum capacity of 2KVA. It is a one start pull Genset, fuel-efficient, and semi-silent with a gasoline fuel tank capacity of 15 liters and easy to maintain.
-
TIGER 2.5KW GASOLINE GENERATOR +BATTERY
TIGER 2.5KW GASOLINE GENERATOR +BATTERY
Gasoline Generator 2.5 KW- Tiger TG3700ETG3700E Gasoline generator is a 4-stroke, single-cylinder, air-cooled gasoline generator, rated output 2.5kva maximum power output 2.7kva. With an AC Frequency of 50 Hz, output voltage of 12V producing a rated AC output of 8.3A. Tiger range of products include engines, generators, and water pumps
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener