-
PENTAX BRIO 2000 MT GREY AUTO PUMP CONTROL 12A
PENTAX BRIO 2000 MT GREY AUTO PUMP CONTROL 12A
PENTAX BRIO 2000 Auto Pump Control -
PIRANA 100L AIR COMPRESSOR 3HP ELECTRIC
PIRANA 100L AIR COMPRESSOR 3HP ELECTRIC
Model : MY2055/8
Motor : 2HP -
PIRANA 50L AIR COMPRESSOR 2HP ELECTRIC PI-50L-2HP
PIRANA 50L AIR COMPRESSOR 2HP ELECTRIC PI-50L-2HP
Model : ZC-0.12/8C
Motor : 2HP -
PL 750 PLANER
Weight : 4.04 kg
Cutting width : 12 Millimetres
– Ejection of the chip to the left and right
– Depth adjustment in 0.2 mm scales.
– The rear flange protects the base.
– 750 watts with 82 mm working width.
– Infinitely adjustable cutting depth -
PLUNGE ROUTER, 1350W, 50MM
Plunge Router – 1350W, 50MM
– Powerful 1350 watt motor
– Soft Start for greater user control & safety
– Full Wave Electronics giving user constant speed
– AccuStop
– Plunge Capacity : 50mm -
REFLECTIVE VEST L-XL YELLOW SAFETY
REFLECTIVE VEST L-XL YELLOW SAFETY
Security Protection High Visibility Yellow Reflective Safety Vest -
ROBIN COMPACTOR DIESEL GA170F 90KG
ROBIN COMPACTOR DIESEL GA170F 90KG
Robin – Plate CompactorFEATURES:
Robin- plate compactor is widely used in building and road construction.
There is no adequate dynamic theory exists to predict vital performance characteristics such as frequency of impacts, speed of forward travel, power delivered to the soil, etc.
It is found that the forward speed and power delivered to the soil are sensitive functions of the ratio of exciting force to dead weight.
The power delivered to the soil tends to be a maximum when the exciting force is approximately twice the dead weight.
It is shown that for certain values of system parameters, it is possible to have periodic behaviour of the system where the period of the motion is an integer multiple of the period of the exciting force. -
ROBIN COMPACTOR PETROL EY20 90KG
ROBIN COMPACTOR DIESEL GA170F 90KG
Robin – Plate CompactorFEATURES:
Robin- plate compactor is widely used in building and road construction.
There is no adequate dynamic theory exists to predict vital performance characteristics such as frequency of impacts, speed of forward travel, power delivered to the soil, etc.
It is found that the forward speed and power delivered to the soil are sensitive functions of the ratio of exciting force to dead weight.
The power delivered to the soil tends to be a maximum when the exciting force is approximately twice the dead weight.
It is shown that for certain values of system parameters, it is possible to have periodic behaviour of the system where the period of the motion is an integer multiple of the period of the exciting force. -
ROBIN CONCRETE VIBRATOR EY20 EXEN + HOSE
ROBIN CONCRETE VIBRATOR EY20 EXEN + HOSE
Robin Engine Concrete Vibrator is widely used in a variety of building purposes and concrete foundation work such as road, bridge and tunnel.it is an indispensable tool in concrete spot in distant area without electricity or when there is black out.
-
ROBIN POWER TROWEL EY20 350MM BLADE
ROBIN POWER TROWEL EY20 350MM BLADE
Power Trowel with Robin Ey20 Engine and 5hp Power Icom -
SAFETY BELT + 2 SHOCK ABSORBER 31A+2*30
SAFETY BELT + 2 SHOCK ABSORBER 31A+2*30
Shock absorber for safety harness -
-
SAFETY HELMET (B,G,O,R,W,Y)
SAFETY HELMET (B,G,O,R,W,Y)
Climax 4004 BOB Safety helmet multiple colors -
SAFETY HELMET WITH RACHET (B,G,O,R,W,Y)
SAFETY HELMET WITH RACHET
CLIMAX 5RS SAFETY HELMET (Orange, Green, Blue, Yellow, White) -
SDS-MAX BREAKER 5KG 7.5J 1100W
Model number : MH 5G
– Powerful 1100 watt motor
– 7.5J EPTA blow energy
– 2 mode SDS-Max chipping hammer
– Multi position chisel function gives 12 different positions to optimize working angle -
SDS-MAX COMBI HAMMER 1100W 40MM 7.5J
Model number : KH 5G
– Powerful 1100 watt motor
– 7.5J EPTA blow energy
– 40mm drilling capacity in concrete
– Rotary stop for chiselling applications -
SDS-PLUS COMBI HAMMER 1010W 28MM FIXTEC
Model number : KH 28 Super XE
– Powerful 1010 watt motor
– 28mm drilling capacity in concrete
– Rotary stop for light chiselling applications
– Soft hammer mode reduces blow energy and speed for drilling/chiselling in sensitive materials -
SDS-PLUS COMBI HAMMER 720W
Model Number : KH 24IE
– Powerful 800 watt motor
– n24mm drilling capacity in concrete
– Rotary stop for light chiselling applications
– Safety cluch for user protection -
SDS-PLUS COMBI HAMMER 800W
Model number : KH 26E
– Powerful 800 watt motor
– 26mm drilling capacity in concrete
– Rotary stop for light chiselling applications
– Safety clutch for user protection -
SPRINTER 4000 START 12-24V 230V BATTERY CHARGER
SPRINTER 4000 START 12-24V 230V BATTERY CHARGER
Battery Charger 12-24V 230V- Telwin Sprinter 4000 StartBattery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans, and light trucks.
-
SPRINTER 6000 START 12-24V 230V BATTERY CHARGER
SPRINTER 6000 START 12-24V 230V BATTERY CHARGER
SPRINTER 6000 START 230V 12-24V
code 829392Battery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans and light trucks.
-
SUPERIOR 245 INVERTER WELDING MACHINE
SUPERIOR 245 INVERTER WELIDNG MACHINE
Inverter Welding Machine – Telwin SUPERIOR 245MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking. Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
-
SUPERPLASMA 130
SUPERPLASMA 130
Compressed air plasma cutting system with high-frequency HF striking of pilot arc. Allows a rapid, distortion-proof cutting of all conductive materials such as steel, stainless steel, galvanized steel, aluminium, copper, brass, etc. Possibility to use long nozzles. Features:- 2 positions for the regulation of cutting current- control devices for torch under-voltage, air pressure, torch short circuit, phase failure, thermostatic protection- possibility to cut on grids with an automatic restart of pilot arc (self restart)- visualization of air pressure.Complete with the torch.
-
TABLE SAW 1800W
Model number : TS250K
– Powerful 1800 W 4800 RPM motor
– Table size with extensions 745 x 1020 mm
– 90mm cutting depth (53mm to 45º).
– Disc diameter 254×30.
– Includes: 36 teeth TCT disc, cutting guide, miter guide.
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener