-
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:INFINITY 220 230V ACX
code 816082
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine – Telwin SUPERIOR 260 CE
Inverter Welding Machine – Telwin SUPERIOR 260 CE
inverter welding machine telwin, superior 260 ce 400v cod. 815503 with mma and tig-lift electrode in direct current (dc), designed for the welding of cellulose electrodes and coated electrodes of aluminum, rutile, basic, stainless steel, cast iron up to a diameter of 5 mm
-
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
Robust and impact resistant. -
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, cellulosic, etc.
Recommended for motor-generators, this model grants high performance despite power supply instability, thanks to the MPGE multi protections: control device of the waveform, filter against input peaks, stabilization of oscillations. Robust and impact resistant. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, and cellulosic. -
JIGSAW TOP HANDLE 700W
Model number : STEP80
– Tophandle jigsaw with a new powerful 700 watt motor
– 6-different speed settings for better cutting control
– Better ergonomic design with integrated soft-grip
– Dust extraction port -
MITRE SAW – 2000W 254MM
Model number : PS 254 L
Internal fan that removes 80% of the dust
Cut line visibility – Adjustable LED and laser
Blade depth adjustment. Allows for trenching application
Mitre lock with detent plate. Mitre: 50 left or right -
NAVIGATOR GASOLINE GEN 3.2KW 6.5HP 23L
NAVIGATOR GASOLINE GEN 3.2KW 6.5HP 23L
Navigator NG3500E2
Gasoline Generator 3.2 KW- Navigator NG3500E2Navigator Generator NG3500E2 is a cost-effective electric generator for your home or small business.
-
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
Welding Machine MMA Turbo ACD 230-400V – Telwin NORDICA 4.185MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with electrodes: rutile.
Complete with MMA welding accessories -
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
Welding Machine ACM 230V-400V MMA – Telwin NORDIKA 3250MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with a wide range of electrodes: rutile.
Complete with MMA welding accessories. -
PL 750 PLANER
Weight : 4.04 kg
Cutting width : 12 Millimetres
– Ejection of the chip to the left and right
– Depth adjustment in 0.2 mm scales.
– The rear flange protects the base.
– 750 watts with 82 mm working width.
– Infinitely adjustable cutting depth -
PLUNGE ROUTER, 1350W, 50MM
Plunge Router – 1350W, 50MM
– Powerful 1350 watt motor
– Soft Start for greater user control & safety
– Full Wave Electronics giving user constant speed
– AccuStop
– Plunge Capacity : 50mm -
PROTECO SLIDING GATE KIT MOVER 4 24V 400KG
PROTECO SLIDING GATE KIT MOVER 4 24V 400KG
Proteco Mover – Sliding Gate MotorQUICK OVERVIEW
The Proteco Mover is a 230v or 380v electromechanical sliding gate motor system for automating gates weighing up to 1500kg and 13 metres in length. The 230v models have a duty cycle of 40% which is lower and means it is entirely suitable for single domestic properties but is unsuited to multi-dwelling or light commercial use. The 380v Mover 15T uses 3-phase power supply and is designed for light commercial use. The Mover uses a pinion (cog) drive mechanism in conjunction with toothed rack affixed to the gate to open and close the gate. The pinion is M4 profile (module 4) which is the industry standard for gates under 2000kg. -
PROTECO SWING GATE KIT LEADER 4 TI 230V 350KG
PROTECO SWING GATE KIT LEADER 4 TI 230V 350KG
Proteco Kit Leader 230v – Double Electric Swing Gate OpenersKEY FEATURES
– Ideal for wooden or metal 5 bar style gates
– Residential use only
– Easy and quick installation
– Inward/Outward opening
– Simple wiring & programming
– Wider opening angles (up to 110° depending on hinge position) -
REFLECTIVE VEST L-XL YELLOW SAFETY
REFLECTIVE VEST L-XL YELLOW SAFETY
Security Protection High Visibility Yellow Reflective Safety Vest -
SDS-MAX BREAKER 5KG 7.5J 1100W
Model number : MH 5G
– Powerful 1100 watt motor
– 7.5J EPTA blow energy
– 2 mode SDS-Max chipping hammer
– Multi position chisel function gives 12 different positions to optimize working angle -
SDS-MAX COMBI HAMMER 1100W 40MM 7.5J
Model number : KH 5G
– Powerful 1100 watt motor
– 7.5J EPTA blow energy
– 40mm drilling capacity in concrete
– Rotary stop for chiselling applications -
SDS-PLUS COMBI HAMMER 1010W 28MM FIXTEC
Model number : KH 28 Super XE
– Powerful 1010 watt motor
– 28mm drilling capacity in concrete
– Rotary stop for light chiselling applications
– Soft hammer mode reduces blow energy and speed for drilling/chiselling in sensitive materials -
SDS-PLUS COMBI HAMMER 720W
Model Number : KH 24IE
– Powerful 800 watt motor
– n24mm drilling capacity in concrete
– Rotary stop for light chiselling applications
– Safety cluch for user protection -
SDS-PLUS COMBI HAMMER 800W
Model number : KH 26E
– Powerful 800 watt motor
– 26mm drilling capacity in concrete
– Rotary stop for light chiselling applications
– Safety clutch for user protection -
SPRINTER 4000 START 12-24V 230V BATTERY CHARGER
SPRINTER 4000 START 12-24V 230V BATTERY CHARGER
Battery Charger 12-24V 230V- Telwin Sprinter 4000 StartBattery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans, and light trucks.
-
SPRINTER 6000 START 12-24V 230V BATTERY CHARGER
SPRINTER 6000 START 12-24V 230V BATTERY CHARGER
SPRINTER 6000 START 230V 12-24V
code 829392Battery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans and light trucks.
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener