-
ROBIN COMPACTOR DIESEL GA170F 90KG
ROBIN COMPACTOR DIESEL GA170F 90KG
Robin – Plate CompactorFEATURES:
Robin- plate compactor is widely used in building and road construction.
There is no adequate dynamic theory exists to predict vital performance characteristics such as frequency of impacts, speed of forward travel, power delivered to the soil, etc.
It is found that the forward speed and power delivered to the soil are sensitive functions of the ratio of exciting force to dead weight.
The power delivered to the soil tends to be a maximum when the exciting force is approximately twice the dead weight.
It is shown that for certain values of system parameters, it is possible to have periodic behaviour of the system where the period of the motion is an integer multiple of the period of the exciting force. -
ROBIN COMPACTOR PETROL EY20 90KG
ROBIN COMPACTOR DIESEL GA170F 90KG
Robin – Plate CompactorFEATURES:
Robin- plate compactor is widely used in building and road construction.
There is no adequate dynamic theory exists to predict vital performance characteristics such as frequency of impacts, speed of forward travel, power delivered to the soil, etc.
It is found that the forward speed and power delivered to the soil are sensitive functions of the ratio of exciting force to dead weight.
The power delivered to the soil tends to be a maximum when the exciting force is approximately twice the dead weight.
It is shown that for certain values of system parameters, it is possible to have periodic behaviour of the system where the period of the motion is an integer multiple of the period of the exciting force. -
ROBIN CONCRETE VIBRATOR EY20 EXEN + HOSE
ROBIN CONCRETE VIBRATOR EY20 EXEN + HOSE
Robin Engine Concrete Vibrator is widely used in a variety of building purposes and concrete foundation work such as road, bridge and tunnel.it is an indispensable tool in concrete spot in distant area without electricity or when there is black out.
-
ROBIN POWER TROWEL EY20 350MM BLADE
ROBIN POWER TROWEL EY20 350MM BLADE
Power Trowel with Robin Ey20 Engine and 5hp Power Icom -
SPRINTER 4000 START 12-24V 230V BATTERY CHARGER
SPRINTER 4000 START 12-24V 230V BATTERY CHARGER
Battery Charger 12-24V 230V- Telwin Sprinter 4000 StartBattery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans, and light trucks.
-
SPRINTER 6000 START 12-24V 230V BATTERY CHARGER
SPRINTER 6000 START 12-24V 230V BATTERY CHARGER
SPRINTER 6000 START 230V 12-24V
code 829392Battery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans and light trucks.
-
SUPERIOR 245 INVERTER WELDING MACHINE
SUPERIOR 245 INVERTER WELIDNG MACHINE
Inverter Welding Machine – Telwin SUPERIOR 245MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking. Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
-
SUPERPLASMA 130
SUPERPLASMA 130
Compressed air plasma cutting system with high-frequency HF striking of pilot arc. Allows a rapid, distortion-proof cutting of all conductive materials such as steel, stainless steel, galvanized steel, aluminium, copper, brass, etc. Possibility to use long nozzles. Features:- 2 positions for the regulation of cutting current- control devices for torch under-voltage, air pressure, torch short circuit, phase failure, thermostatic protection- possibility to cut on grids with an automatic restart of pilot arc (self restart)- visualization of air pressure.Complete with the torch.
-
TEA ELEVATOR HOIST HE301MF-H40 (300KG – 1PH)
TEA ELEVATOR HOIST HE301MF-H40 (300KG – 1PH)
-
TEA ELEVATOR HOIST HE501MF-H40 (500KG – 3PH)
TEA ELEVATOR HOIST HE501MF-H40 (500KG – 3PH)
-
TransPallet Jack 2 TON- O.M.C.N 149/M
TransPallet Jack 2 TON- O.M.C.N 149/M
• Professional forklifts.
• Sturdy oversized structure fully made of steel.
• Mechanical safety limit switch.
• Front linkage made of aluminium.
• “Man-standing by” descent control device with controlled speed.
• Safety valve to avoid any possible overload.
• Rear wheels made of aluminium, mounted on bearings.
• Double front rolls made of polyurethane.
• Rear wheels covered with polyurethane. -
TransPallet Jack 3 TON- O.M.C.N 223/M
TransPallet Jack 3 TON- O.M.C.N 223/M
• Professional forklifts.
• Sturdy oversized structure fully made of steel.
• Mechanical safety limit switch.
• Two models available: descent control by hand or foot.
• Front linkage made of aluminium.
• “Man-standing by” descent control device with controlled speed.
• Safety valve to avoid any possible overload.
• Rear wheels made of aluminium, mounted on bearings.
• Double front rolls made of polyurethane
• Rear wheels covered with polyurethane. -
Trolley Forklift 1 TON- OMCN 206/M
Trolley Forklift 1 TON- OMCN 206/M
Hand Pallet Truck 206/M
• Manual forklifts.
• Minimum height from the ground 90 mm only.
• Two-speed pump to lift quickly.
• Width-adjustable forks for the maximum versatility.
• Move easily thanks to big rear turning wheels equipped with a stationing brake.
• Front rolls made of polyurethane.
• “Man-standing by” descent control device with controlled speed.
• Great lifting height. -
Trolley Hydraulic Crane 1.5 TON- O.M.C.N SL/15
Trolley Hydraulic Crane 1.5 TON- O.M.C.N SL/15
• Ground chrome-plated rod for top reliability over time.
• Extendable arm in 4 working positions.
• Revolving rear wheels to move it easily.
• 360° revolving hook.
• Lateral tie-rods.
• Safety valve to avoid any possible overload.
• Descent control device with a controlled speed.
• Two-speed hydraulic pump.
• Polyurethane wheels. -
Welding Machine 230-400V MMA AC – Telwin EURARC 422 ACX
Welding Machine 230-400V MMA AC – Telwin EURARC 422 ACX
MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
The model has a double secondary voltage for use also with basic and rutile electrodes. -
Welding Machine 230V MAXIMA 230 SYNERGIC
Welding Machine 230V MAXIMA 230 SYNERGIC
Microprocessor controlled MIG-MAG/FLUX/BRAZING/MMA/TIG DC- LIFT inverter wire welding machine.
It allows great versatility in the use of various types of materials (steel, stainless steel, aluminium) and in all possible applications, from maintenance to installation works.
The SYNERGIC adjustment of the welding parameters makes the products easy to use and grants excellent results, always, also for the less experienced operator.
Light and compact, it can be easily carried in any intervention place, both inside and outside.
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener