-
EMUL PLUS LIQUID MEMBRANE 4.5KG
EMUL PLUS LIQUID MEMBRANE 4.5KG
Bituminous Waterproofing Liquids Emülzer® Plus 1040 – Liquid MembraneDESCRIPTION
Emülzer® Plus is a modified bitumen and solvent based, single component, ready-to-use waterproofing liquid membrane. By the evaporation of the solvent it contains, it adheres firmly to the surface it is applied, forming an elastic waterproof layer. -
EMUL PUNTODRAIN 400GR/M2 (2X20M) NORMAL
EMUL PUNTODRAIN 400GR/M2 (2X20M) NORMAL
Complementary Products PUNTODRAIN HDPE Drainage SheetDESCRIPTION
Protective sheet for drainage and insulation made up of high density polyethelene (HDPE). -
FAST-85 TILES CUTTING MACHINE 85CM
FAST-85 TILES CUTTING MACHINE 85CM
STAR manual cutters, Light and versatile cutter -
FILTER FOR FULL FACE MASK ABEKP3
FILTER FOR FULL FACE MASK ABEKP3
Filter for full face mask , ABEK-P3 Type -
HUNTER AIR COMPRESSOR FOR CAR 4X4 12V 150PSI
HUNTER AIR COMPRESSOR FOR CAR 4X4 12V 150PSI
-
HUNTER AIR COMPRESSOR MINI FOR CAR 12V 150PSI
HUNTER AIR COMPRESSOR MINI FOR CAR 12V 150PSI
-
HUNTER HEX KEY SET, 9PCS TROX T10-T50
HUNTER HEX KEY SET, 9PCS TROX T10-T50
-
Hydraulic Bottle Jack 10 TON- O.M.C.N 127
Hydraulic Bottle Jack 10 TON- O.M.C.N 127
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 15 TON- O.M.C.N 128
Hydraulic Bottle Jack 15 TON- O.M.C.N 128
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 20 TON- O.M.C.N 129
Hydraulic Bottle Jack 20 TON- O.M.C.N 129
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 3 TON- O.M.C.N 125
Hydraulic Bottle Jack 3 TON- O.M.C.N 125
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 5 TON- O.M.C.N 126
Hydraulic Bottle Jack 5 TON- O.M.C.N 126
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Press 100 TON- OMCN 160
Hydraulic Press 100 TON- OMCN 160
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Press 50 TON- OMCN 158
Hydraulic Press 50 TON- OMCN 158
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 15 TON- O.M.CN 123
Hydraulic Trolley Jack 15 TON- O.M.CN 123
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Equipped with foot-approaching control.
• Hand descent-control.
• Rubber covered support -
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
JIGSAW TOP HANDLE 700W
Model number : STEP80
– Tophandle jigsaw with a new powerful 700 watt motor
– 6-different speed settings for better cutting control
– Better ergonomic design with integrated soft-grip
– Dust extraction port -
MITRE SAW – 2000W 254MM
Model number : PS 254 L
Internal fan that removes 80% of the dust
Cut line visibility – Adjustable LED and laser
Blade depth adjustment. Allows for trenching application
Mitre lock with detent plate. Mitre: 50 left or right -
ND-180 ELECTRIC TILES CUTTING MACHINE
ND-180 ELECTRIC TILES CUTTING MACHINE
Electric Cutter ND-180
Portable cutter, ideal for finishings and renovations. -
PL 750 PLANER
Weight : 4.04 kg
Cutting width : 12 Millimetres
– Ejection of the chip to the left and right
– Depth adjustment in 0.2 mm scales.
– The rear flange protects the base.
– 750 watts with 82 mm working width.
– Infinitely adjustable cutting depth
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener