-
Axle Stand Jack 1 TON- OMCN 110
Axle Stand Jack 1 TON- OMCN 110
Lift made of one hydropneumatic pump and two hydraulic stands, capacity 10 ton each one, operating in a couple of independently one from another. The stands are also equipped with a hand-system to change the minimum height. The ideal solution to lift and free the wheels of heavy vehicles and carry out quick operations.
-
Axle Stand Jack 3.5 TON- OMCN 110/B
Axle Stand Jack 3.5 TON- OMCN 110/B
Lift made of one hydropneumatic pump and two hydraulic stands, capacity 10 ton each one, operating in a couple of independently one from another. The stands are also equipped with a hand-system to change the minimum height. The ideal solution to lift and free the wheels of heavy vehicles and carry out quick operations.
-
GGA AIR COMPRESSOR 100L GG470
GGA AIR COMPRESSOR 100L GG470
230V 2HP 254L/MIN 8BAR -
GGA AIR COMPRESSOR 200L GG520
GGA AIR COMPRESSOR 200L GG520
230V 3HP 360L/MIN 8BAR -
-
Hydraulic Bottle Jack 10 TON- O.M.C.N 127
Hydraulic Bottle Jack 10 TON- O.M.C.N 127
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 15 TON- O.M.C.N 128
Hydraulic Bottle Jack 15 TON- O.M.C.N 128
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 20 TON- O.M.C.N 129
Hydraulic Bottle Jack 20 TON- O.M.C.N 129
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 3 TON- O.M.C.N 125
Hydraulic Bottle Jack 3 TON- O.M.C.N 125
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 5 TON- O.M.C.N 126
Hydraulic Bottle Jack 5 TON- O.M.C.N 126
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Press 100 TON- OMCN 160
Hydraulic Press 100 TON- OMCN 160
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Press 50 TON- OMCN 158
Hydraulic Press 50 TON- OMCN 158
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 15 TON- O.M.CN 123
Hydraulic Trolley Jack 15 TON- O.M.CN 123
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Equipped with foot-approaching control.
• Hand descent-control.
• Rubber covered support -
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
NAVIGATOR GASOLINE GEN 3.2KW 6.5HP 23L
NAVIGATOR GASOLINE GEN 3.2KW 6.5HP 23L
Navigator NG3500E2
Gasoline Generator 3.2 KW- Navigator NG3500E2Navigator Generator NG3500E2 is a cost-effective electric generator for your home or small business.
-
OLEOMAC BRUSH CUTTER 1.0HP
Oleomac Brush Cutter 1.0HP
Sparta 250T
Lightweight brushcutters
– Power/Displacement 1.0 HP – 0.8 kW/25.4 cm³
– Cutting components 130 mm dia. Tap&Go head with 2.40 mm dia. line – 255 mm dia. disc with 3 blades
– Dry weight without cutting tools 6.2 kg -
OLEOMAC BRUSH CUTTER 2.0HP 0.60L 26MM BLADE
OLEOMAC BRUSH CUTTER 2.0HP
H series brushcuttersBCH 40 T / BCH 400 T
– Power/Displacement 2.0 HP – 1.5 kW/40.2 cm³
– Dry weight without cutting tools 8.1 kg (40 T) – 8.2 kg (400 T) -
OLEOMAC BRUSH CUTTER 2.1HP
Oleomac Brush Cutter 2.1HP
OM 741
Professional brushcutters
– Power/Displacement 2.1 HP – 1.6 kW/40.2 cm³
– Cutting components 130 mm dia. Load&Go head with 3.00 mm dia. line – 255 mm dia. disc with 3 blades
– Dry weight without cutting tools 7.9 kg -
OLEOMAC BRUSH CUTTER 2.1HP 0.87L 28MM ROPE
OLEOMAC BRUSH CUTTER 2.1HP
H series brushcuttersBCH 40 T / BCH 400 T
– Power/Displacement 2.0 HP – 1.5 kW/40.2 cm³
– Dry weight without cutting tools 8.1 kg (40 T) – 8.2 kg (400 T) -
OLEOMAC CHAINSAW 3.0HP
Oleomac Chainsaw 3.0HP
GSH 51 / GSH 510
H series chainsaws
– Power/Displacement 3.0 HP – 2.2 kW/50.9 cm³
– Bar length (nose) 16″-18″-20″, 41-46-51 cm, (sprocket)
– Dry weight without bar and chain 5.4 kg
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener