Since the company began in 1924, Milwaukee Tool has led the industry in both durability and performance. With an unwavering commitment to the trades, Milwaukee continues to lead with a focus on providing innovative, trade-specific solutions.
-
Battery Charger 12V – Telwin Drive 13000
Battery Charger 12V – Telwin Drive 13000
12V ultra-compact multifunction emergency portable starter for motorcycles, automobiles, campers, marine engines, etc.
Fit with two USB outputs (1A-2,1A) to charge (power bank) electronic devices (tablets, smartphones, MP3 players, notebooks, cameras, etc.), two 12/19V outputs to power laptops and other devices, and two high-intensity emergencies LED lights.
It uses high-efficiency lithium LiPo polymer cells that provide rapid and complete charging, constantly monitored by a series of LEDs.
Complete with starting cables, various connectors for mobile devices, cigarette lighter plug, and wall charge. -
Battery Charger 230V 6V/12V/24V – Telwin Pulse 50
Battery Charger 230V 6V/12V/24V – Telwin Pulse 50
6/12/24V electronic, automatic battery charger for WET, GEL, AGM, MF, SPIRAL, START-STOP batteries, for automatic charging/maintenance (PULSE TRONIC), for recovering sulfated or very low batteries and vehicles start aid.
It is very easy to use, thanks to the automatic recognition of the type of battery, and the presence of a user-friendly keypad.
The innovative Power Stream technology guarantees better performance, up to 50% more than traditional battery chargers thanks to more effective and complete control of the charging process, to notably faster charging times and maintenance of the optimal battery conditions, which guarantee a long working life.
The Pulse Tronic technology guarantees optimal battery charging over 8 phases which test, monitor, increase, and maintain the charge state. -
BOOSTER CABLE 3M 350A POWER LINE
TELWIN BOOSTER CABLE 3M 350A POWER LINE
-
Brazing Welding Machine 230-400V MIG-MAG – Telwin MASTERMIG 270/2
Brazing Welding Machine 230-400V MIG-MAG – Telwin MASTERMIG 270/2
MIG-MAG/BRAZING welding machine. Designed for continuous and spot welding with electronic regulation of spot welding time.
Thanks to optional kits this model allows also sheet tempering and riveting.
The flexibility of use with a wide range of materials such as steel, stainless steel, high strength steels, and aluminium.
Complete with MIG-MAG welding accessories. -
Brazing Welding Machine 230-400V MIG-MAG/FLUX – Telwin ELECTROMIG 400 SYNERGIC
Brazing Welding Machine 230-400V MIG-MAG/FLUX – Telwin ELECTROMIG 400 SYNERGIC
MIG-MAG/FLUX/BRAZING/MMA and TIG DC-Lift multiprocess inverter welding machine controlled by a microprocessor, with a 4-roller wire feeder.
Flexible use with various welded materials (steel, stainless steel, aluminium) or brazed materials (galvanized sheet metal). Wide variety of application fields, from industry to maintenance, installation to bodywork activities. The synergic adjustment makes the product simple to use. The Made in Telwin ATC technology makes it easy to achieve excellent standards of welding on thin materials thanks to state-of-the-art control of the arc. -
CEV 200 PRO > 8″ CERAMIC TILES DIAMOND CUTTING BLADE
CEV 200 PRO > 8″ CERAMIC TILES DIAMOND CUTTING BLADE
CONTINUOUS – CEV ceramic tiles diamond bladeCEV-200 PRO CONTINUOUS Ceramic tiles diamond blade
Ref. – 25913
Outside diameter – 200 mm
Inside diameter – 25,4 mm
Disc segment high – 7 mm
Segment Thickness – 1,7 mm -
CEV PRO
CEV PRO
RUBI CEV continuous rim diamond blades are the best choice for general cutting of ceramic tiles.
The combination between the diamond grain and the alloy that makes up the bond makes CEV diamond blades by RUBI perfect for general cutting of ceramic tiles like glazed or porcelain tiles.
-
CEV SUPERPRO
CEV SUPERPRO
RUBI CEV continuous rim diamond blades are the best choice for general cutting of ceramic tiles.
The combination between the diamond grain and the alloy that makes up the bond makes CEV diamond blades by RUBI perfect for general cutting of ceramic tiles like glazed or porcelain tiles.
-
CHEMICAL FULL FACE MASK 731C
CHEMICAL FULL FACE MASK 731C
CLIMAX Chemical Full Face Mask 731C -
CHEMICAL HALF MASK SINGLE 745A
CHEMICAL HALF MASK SINGLE 745A
Climax 745 Half Mask with P3 Filter -
CPA SUPERPRO
CPA SUPERPRO
The RUBI CPA diamond blade range is especially recommended for cutting hard materials such as granite, rustic tiles, Klinker, refractories, slate, etc.
Being a continuous rim blade, the CPA blade offers the highest quality finish.
-
DALLAS ELECTRODE HOLDER 400A BL
DALLAS ELECTRODE HOLDER 400A BL
Electrode Holder- Telwin Dallas Electrode -
DIGITAL MODULAR 230
DIGITAL MODULAR 230
Microprocessor controlled spot welding machine. It implements a new Fuzzy logic control system that simplifies its use and increases the spot welding quality.
Suitable for spot welding of sheets with maximum thickness of 2+2mm. -
DTS700 SYSTEM-BATTERY DIGITAL TESTER
DTS700 SYSTEM-BATTERY DIGITAL TESTER
intelligent digital tester which allows not only the control of the charge status of a battery, but it also verifies the correct functioning of the starting and charging systems (alternator) of the vehicle’s battery. Extremely compact, handy, and easy-to-use, it enables us to operate with batteries (WET, GEL, AGM, PbCa) at 12V without disconnecting them from the vehicle, making the testing operations easy and quick to perform. The easy digital display and the led system provide the instant and precise viewing of the required information, allowing for efficient control of the batteries and the starting and charging systems. Besides, it is possible to select the reference standard used by the manufacturer of the batteries (EN, IEC, DIN, SAE, CA -MCA) to which various starting current ranges correspond: further confirmation of the wide range of use of this tool.
-
DU-200-EVO 800W 1.1HP ELECTRIC TILES CUTTING MACHINE
DU-200-EVO 800W 1.1HP ELECTRIC TILES CUTTING MACHINE
Mobile head cutter for renovations and light works.DU-200 EVO 850 230V 50HZ Electric Cutter with CEV SUPERPRO
– Ref. – 54975
– Cutting length – 85 cm
– Diagonal cutting length – 60×60 cm
– Cutting height – 35 mm
– Miter Thickness cut – 20 mm
– Power supply – 230V-50Hz.
– Revolutions per minute – 2790
– With blade –
– Outside diameter – 200 mm
– Length Width Height (machine overall dimensions) – 136x39x102 cm
– Net weight without packaging – 27,2 kg -
-
Electric Scraper 250W- RUBISCRAPER-250
Electric Scraper 250W- RUBISCRAPER-250
Among the different options that RUBI offers to professionals for the removal of cementitious grout joints, we will highlight the revolutionary electric scraper RUBISCRAPER-250 and its innovative and patented blade (exclusive product of RUBI). Within the main advantages of the RUBISCRAPER-250 stand out: the ease with which we can control the depth of removal, its high robustness, the fact that it does not generate dust since it does not work by friction, the self-guided system that allows us to always stay inside the joint and, possibly the most relevant aspect, minimize the risk of damaging or breaking * the ceramic tiles during the process.
-
FAST-85 TILES CUTTING MACHINE 85CM
FAST-85 TILES CUTTING MACHINE 85CM
STAR manual cutters, Light and versatile cutter -
FILTER FOR FULL FACE MASK ABEKP3
FILTER FOR FULL FACE MASK ABEKP3
Filter for full face mask , ABEK-P3 Type -
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:INFINITY 220 230V ACX
code 816082
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine – Telwin SUPERIOR 260 CE
Inverter Welding Machine – Telwin SUPERIOR 260 CE
inverter welding machine telwin, superior 260 ce 400v cod. 815503 with mma and tig-lift electrode in direct current (dc), designed for the welding of cellulose electrodes and coated electrodes of aluminum, rutile, basic, stainless steel, cast iron up to a diameter of 5 mm
-
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
Robust and impact resistant. -
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, cellulosic, etc.
Recommended for motor-generators, this model grants high performance despite power supply instability, thanks to the MPGE multi protections: control device of the waveform, filter against input peaks, stabilization of oscillations. Robust and impact resistant. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.