-
Axle Stand Jack 1 TON- OMCN 110
Axle Stand Jack 1 TON- OMCN 110
Lift made of one hydropneumatic pump and two hydraulic stands, capacity 10 ton each one, operating in a couple of independently one from another. The stands are also equipped with a hand-system to change the minimum height. The ideal solution to lift and free the wheels of heavy vehicles and carry out quick operations.
-
Axle Stand Jack 3.5 TON- OMCN 110/B
Axle Stand Jack 3.5 TON- OMCN 110/B
Lift made of one hydropneumatic pump and two hydraulic stands, capacity 10 ton each one, operating in a couple of independently one from another. The stands are also equipped with a hand-system to change the minimum height. The ideal solution to lift and free the wheels of heavy vehicles and carry out quick operations.
-
Battery Charger 12V – Telwin Drive 13000
Battery Charger 12V – Telwin Drive 13000
12V ultra-compact multifunction emergency portable starter for motorcycles, automobiles, campers, marine engines, etc.
Fit with two USB outputs (1A-2,1A) to charge (power bank) electronic devices (tablets, smartphones, MP3 players, notebooks, cameras, etc.), two 12/19V outputs to power laptops and other devices, and two high-intensity emergencies LED lights.
It uses high-efficiency lithium LiPo polymer cells that provide rapid and complete charging, constantly monitored by a series of LEDs.
Complete with starting cables, various connectors for mobile devices, cigarette lighter plug, and wall charge. -
Battery Charger 230V 6V/12V/24V – Telwin Pulse 50
Battery Charger 230V 6V/12V/24V – Telwin Pulse 50
6/12/24V electronic, automatic battery charger for WET, GEL, AGM, MF, SPIRAL, START-STOP batteries, for automatic charging/maintenance (PULSE TRONIC), for recovering sulfated or very low batteries and vehicles start aid.
It is very easy to use, thanks to the automatic recognition of the type of battery, and the presence of a user-friendly keypad.
The innovative Power Stream technology guarantees better performance, up to 50% more than traditional battery chargers thanks to more effective and complete control of the charging process, to notably faster charging times and maintenance of the optimal battery conditions, which guarantee a long working life.
The Pulse Tronic technology guarantees optimal battery charging over 8 phases which test, monitor, increase, and maintain the charge state. -
BOOSTER CABLE 3M 350A POWER LINE
TELWIN BOOSTER CABLE 3M 350A POWER LINE
-
Brazing Welding Machine 230-400V MIG-MAG – Telwin MASTERMIG 270/2
Brazing Welding Machine 230-400V MIG-MAG – Telwin MASTERMIG 270/2
MIG-MAG/BRAZING welding machine. Designed for continuous and spot welding with electronic regulation of spot welding time.
Thanks to optional kits this model allows also sheet tempering and riveting.
The flexibility of use with a wide range of materials such as steel, stainless steel, high strength steels, and aluminium.
Complete with MIG-MAG welding accessories. -
Brazing Welding Machine 230-400V MIG-MAG/FLUX – Telwin ELECTROMIG 400 SYNERGIC
Brazing Welding Machine 230-400V MIG-MAG/FLUX – Telwin ELECTROMIG 400 SYNERGIC
MIG-MAG/FLUX/BRAZING/MMA and TIG DC-Lift multiprocess inverter welding machine controlled by a microprocessor, with a 4-roller wire feeder.
Flexible use with various welded materials (steel, stainless steel, aluminium) or brazed materials (galvanized sheet metal). Wide variety of application fields, from industry to maintenance, installation to bodywork activities. The synergic adjustment makes the product simple to use. The Made in Telwin ATC technology makes it easy to achieve excellent standards of welding on thin materials thanks to state-of-the-art control of the arc. -
DALLAS ELECTRODE HOLDER 400A BL
DALLAS ELECTRODE HOLDER 400A BL
Electrode Holder- Telwin Dallas Electrode -
DIGITAL MODULAR 230
DIGITAL MODULAR 230
Microprocessor controlled spot welding machine. It implements a new Fuzzy logic control system that simplifies its use and increases the spot welding quality.
Suitable for spot welding of sheets with maximum thickness of 2+2mm. -
DTS700 SYSTEM-BATTERY DIGITAL TESTER
DTS700 SYSTEM-BATTERY DIGITAL TESTER
intelligent digital tester which allows not only the control of the charge status of a battery, but it also verifies the correct functioning of the starting and charging systems (alternator) of the vehicle’s battery. Extremely compact, handy, and easy-to-use, it enables us to operate with batteries (WET, GEL, AGM, PbCa) at 12V without disconnecting them from the vehicle, making the testing operations easy and quick to perform. The easy digital display and the led system provide the instant and precise viewing of the required information, allowing for efficient control of the batteries and the starting and charging systems. Besides, it is possible to select the reference standard used by the manufacturer of the batteries (EN, IEC, DIN, SAE, CA -MCA) to which various starting current ranges correspond: further confirmation of the wide range of use of this tool.
-
GASOLINE WATER PUMP 3″ DAISHIN ENGINE
GASOLINE WATER PUMP 3″ DAISHIN ENGINE
SCR-80HG -
GASOLINE WATER PUMP 3″ HONDA ENGINE
GASOLINE WATER PUMP 3″HONDA ENGINE
SCR-80HX -
GGA AIR COMPRESSOR 100L GG470
GGA AIR COMPRESSOR 100L GG470
230V 2HP 254L/MIN 8BAR -
GGA AIR COMPRESSOR 200L GG520
GGA AIR COMPRESSOR 200L GG520
230V 3HP 360L/MIN 8BAR -
-
Hydraulic Bottle Jack 10 TON- O.M.C.N 127
Hydraulic Bottle Jack 10 TON- O.M.C.N 127
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 15 TON- O.M.C.N 128
Hydraulic Bottle Jack 15 TON- O.M.C.N 128
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 20 TON- O.M.C.N 129
Hydraulic Bottle Jack 20 TON- O.M.C.N 129
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 3 TON- O.M.C.N 125
Hydraulic Bottle Jack 3 TON- O.M.C.N 125
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 5 TON- O.M.C.N 126
Hydraulic Bottle Jack 5 TON- O.M.C.N 126
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Press 100 TON- OMCN 160
Hydraulic Press 100 TON- OMCN 160
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Press 50 TON- OMCN 158
Hydraulic Press 50 TON- OMCN 158
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels.
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener