EMUL FELT MEMBRANE EM400P 10M 3MM

EMULZER FELT MEMBRANE EM400P 10M 3MM
Bituminous Membranes Membrane APP Modified Bituminous Membranes

BASIC INFORMATION
• They can be adhered to Emülzer C or Emilkote primed surfaces by torch application. First coat membranes must be adhered solely at overlaps, and second coat membranes must be adhered to the first coat membrane as well as the overlaps. Note that the surfaces are not primed in packaging applications.

• At seams they should overlap 10 cm horizontally, and 15 cm vertically. For ease of use, overlap points are marked on Emülzer membranes.

• Bituminous membranes must be applied at least in two coats and zigzagging (must be 50 cm horizontally and 5 meters vertically).

EM 400P POLIMER BITUMINOUS MEMBRANES
3-4 mm thick bituminous membranes reinforced with polyester felt. Both sides are covered with PE film.

USAGE AREAS
Used in 2 coats in foundation packaging insulation, and as the first coat in shingle, slated or aluminium foiled membrane applications. Advantages
Thanks to polyester felt reinforcement, they offer high tensile strength as well as extension strength.