-
AKRILAN 600 ACRYLIC BASED UV RESISTANT LIQUID MEMB 15KG
AKRILAN 600 ACRYLIC BASED UV RESISTANT LIQUID MEMB 15KG
Fixa AKRILAN 600 Acrylic Based UV Resistant Liquid Membrane, Packaging Size: 15 Kg -
AKRILAN 600 ACRYLIC BASED UV RESISTANT LIQUID MEMB 5KG
AKRILAN 600 ACRYLIC BASED UV RESISTANT LIQUID MEMB 5KG
Fixa AKRILAN 600 Acrylic Based UV Resistant Liquid Membrane, Packaging Size: 5 Kg -
AQUAFIX CRYSTALLIZED WATER PROOFING 25KG
AQUAFIX CRYSTALLIZED WATER PROOFING 25KG
Fixa Aquafix Crystallized Waterproofing Material -25kgIt is a cement-based, crystalline powder mortar consisting of concentrated chemical substances and specially selected fine aggregate. It can also be applied by dry sprinkling against the insulation problem that may occur in horizontal work joints.
-
AQUALATEX MORTAR AND SCREED ADM WATERPROOFING AND BOUNDING 6KG
AQUALATEX MORTAR AND SCREED ADM WATERPROOFING AND BOUNDING 6KG
Mortar and Screed Admixture with Waterproofing and Bonding Properties -
AQUASTOP RAPID SETTING PLUGGING MORTAR 5KG
AQUASTOP RAPID SETTING PLUGGING MORTAR 5KG
Rapid Setting Powder Plugging MortarDESCRIPTION:
waterproofing material in powder-form, containing special type cement and chemical admixtures and polymer additives that provides high degree of adherence. it is used to repair and waterproof active water leakages. it hardens in 2 – 3 minutes in reaction with water. -
Axle Stand Jack 1 TON- OMCN 110
Axle Stand Jack 1 TON- OMCN 110
Lift made of one hydropneumatic pump and two hydraulic stands, capacity 10 ton each one, operating in a couple of independently one from another. The stands are also equipped with a hand-system to change the minimum height. The ideal solution to lift and free the wheels of heavy vehicles and carry out quick operations.
-
Axle Stand Jack 3.5 TON- OMCN 110/B
Axle Stand Jack 3.5 TON- OMCN 110/B
Lift made of one hydropneumatic pump and two hydraulic stands, capacity 10 ton each one, operating in a couple of independently one from another. The stands are also equipped with a hand-system to change the minimum height. The ideal solution to lift and free the wheels of heavy vehicles and carry out quick operations.
-
BEITER ALUMINIUM ELEVATING TRIPOD 1.2M
BEITER ALUMINIUM ELEVATING TRIPOD 1.2M
-
BEITER TRI PLANE RED LASER LEVEL – BART 360
BEITER BART-3DG 360° SELF-LEVELING TRI-PLANE GREEN LASER LEVEL
Highly visible laser lines, can use with optional laser receiver. Good for outdoor using. -
Hydraulic Bottle Jack 10 TON- O.M.C.N 127
Hydraulic Bottle Jack 10 TON- O.M.C.N 127
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 15 TON- O.M.C.N 128
Hydraulic Bottle Jack 15 TON- O.M.C.N 128
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 20 TON- O.M.C.N 129
Hydraulic Bottle Jack 20 TON- O.M.C.N 129
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 3 TON- O.M.C.N 125
Hydraulic Bottle Jack 3 TON- O.M.C.N 125
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 5 TON- O.M.C.N 126
Hydraulic Bottle Jack 5 TON- O.M.C.N 126
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
Hydraulic Bottle Jack 50 TON- O.M.C.N 130/A
• Oversized structure made of very resistant steel: the most solid on the market.
• Big base for the best stability.
• Safety valve to avoid any possible overload.
• The heaviest models are equipped with a handle to ease transport.
• Quick and precise approach under the lifting points by screw -
Hydraulic Press 100 TON- OMCN 160
Hydraulic Press 100 TON- OMCN 160
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Press 50 TON- OMCN 158
Hydraulic Press 50 TON- OMCN 158
• Compact and sturdy structure fully made of welded steel.
• Shafts made of specially treated and chromium-plated steel.
• Spring made of steel inside the cylinder for a rapid return of the shaft.
• Two-speed manual pump: fast when approaching and precise when working.
• Knob on the pump to control both speeds.
• Winch to raise easily and quickly the workbench.
• Supplied with a large diameter manometer. -
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
Hydraulic Trolley Jack 10 TON- O.M.C.N 122
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 15 TON- O.M.CN 123
Hydraulic Trolley Jack 15 TON- O.M.CN 123
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
Hydraulic Trolley Jack 20 TON- O.M.C.N 123/A
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
Hydraulic Trolley Jack 3 TON- O.M.C.N 3020
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Equipped with foot-approaching control.
• Hand descent-control.
• Rubber covered support -
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
Hydraulic Trolley Jack 5 TON- O.M.C.N 118
• Air-hydraulic trolley jack.
• Suggested to lift cars, SUV, commercial vehicles, and medium lorries.
• Completely innovative design.
• Very low profile.
• Ergonomic handle.
• Support holder with a wide base.
• Stainless steel support.
• Nylon wheels. -
POLAND 620 POLYURETHANE A+B BLUE 6KG
POLAND 620 POLYURETHANE A+B BLUE 6KG
Polyurethane Based Double Component Water Proofing MaterialDESCRIPTION:
A double component, polyurethane based, solvent free liquid water isolation material. -
PROTECO SLIDING GATE KIT MOVER 4 24V 400KG
PROTECO SLIDING GATE KIT MOVER 4 24V 400KG
Proteco Mover – Sliding Gate MotorQUICK OVERVIEW
The Proteco Mover is a 230v or 380v electromechanical sliding gate motor system for automating gates weighing up to 1500kg and 13 metres in length. The 230v models have a duty cycle of 40% which is lower and means it is entirely suitable for single domestic properties but is unsuited to multi-dwelling or light commercial use. The 380v Mover 15T uses 3-phase power supply and is designed for light commercial use. The Mover uses a pinion (cog) drive mechanism in conjunction with toothed rack affixed to the gate to open and close the gate. The pinion is M4 profile (module 4) which is the industry standard for gates under 2000kg.
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener