-
EMUL EMILKOTE BITUMINUS FOR WATERPROOFING 5KG
EMUL EMILKOTE BITUMINUS FOR WATERPROOFING 5KG
Bituminous Waterproofing Liquids Emilkote 1020 -Bituminous EmulsionDESCRIPTION
It is a ready-to-use waterproofing material obtained by mixing water and bitumen by using special methods. By the evaporation of the water it contains, it forms a waterproof layer on the surface it is applied. -
EMUL FELT MEMBRANE EM400P 10M 3MM
EMULZER FELT MEMBRANE EM400P 10M 3MM
Bituminous Membranes Membrane APP Modified Bituminous Membranes -
EMUL FELT MEMBRANE EM400P 10M 4MM
EMUL FELT MEMBRANE EM400P 10M 4MM
Bituminous Membranes Membrane APP Modified Bituminous Membranes -
EMUL GEOTEXTILE MUDGLASS
EMUL GEOTEXTILE MUDGLASS
Complementary Products Geotextile Felt Non-Woven Polyester and Polypropylene Felt -
EMUL PAR MEMBRANE EM300 10M 3.5MM RED
EMUL PAR MEMBRANE EM300 10M 3.5MM RED
Bituminous Membranes Membrane APP Modified Bituminous Membranes -
EMUL PAR MEMBRANE EM300 10M 3.5MM RED
EMUL PAR MEMBRANE EM300 10M 3.5MM RED
Bituminous Membranes Membrane APP Modified Bituminous Membranes -
EMUL PERMOSTOP POWDER 330GRM
EMUL PERMOSTOP POWDER 330GRM
Concrete and Mortar Additives PERMO STOP 3020 – Powder AdmixtureDESCRIPTION
It is a high-quality water-repellent powder admixture used for waterproofing and damp-proofing in plaster, alum, and concrete applications -
EMUL PLUS LIQUID MEMBRANE 16KG
EMUL PLUS LIQUID MEMBRANE 16KG
Bituminous Waterproofing Liquids Emülzer® Plus 1040 – Liquid MembraneDESCRIPTION
Emülzer® Plus is a modified bitumen and solvent based, single component, ready-to-use waterproofing liquid membrane. By the evaporation of the solvent it contains, it adheres firmly to the surface it is applied, forming an elastic waterproof layer. -
EMUL PLUS LIQUID MEMBRANE 4.5KG
EMUL PLUS LIQUID MEMBRANE 4.5KG
Bituminous Waterproofing Liquids Emülzer® Plus 1040 – Liquid MembraneDESCRIPTION
Emülzer® Plus is a modified bitumen and solvent based, single component, ready-to-use waterproofing liquid membrane. By the evaporation of the solvent it contains, it adheres firmly to the surface it is applied, forming an elastic waterproof layer. -
EMUL PUNTODRAIN 400GR/M2 (2X20M) NORMAL
EMUL PUNTODRAIN 400GR/M2 (2X20M) NORMAL
Complementary Products PUNTODRAIN HDPE Drainage SheetDESCRIPTION
Protective sheet for drainage and insulation made up of high density polyethelene (HDPE). -
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
INFINITY 220 ACX 230V MMA TIG DC INVERTER WELDING MACHINE
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:INFINITY 220 230V ACX
code 816082
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine – Telwin SUPERIOR 260 CE
Inverter Welding Machine – Telwin SUPERIOR 260 CE
inverter welding machine telwin, superior 260 ce 400v cod. 815503 with mma and tig-lift electrode in direct current (dc), designed for the welding of cellulose electrodes and coated electrodes of aluminum, rutile, basic, stainless steel, cast iron up to a diameter of 5 mm
-
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
Inverter Welding Machine – Telwin TECHNOLOGY 236 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
Robust and impact resistant. -
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
Inverter Welding Machine 230V CE/MPGE ACX + ALU – Telwin TECHNOLOGY 238 XT
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, cellulosic, etc.
Recommended for motor-generators, this model grants high performance despite power supply instability, thanks to the MPGE multi protections: control device of the waveform, filter against input peaks, stabilization of oscillations. Robust and impact resistant. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 220
TELWIN Inverter Welding Machine ACX 230V MMA TIG DC – INFINITY 220:
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. -
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
Inverter Welding Machine ACX 230V MMA TIG DC – Telwin INFINITY 228
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, and cellulosic. -
JIGSAW TOP HANDLE 700W
Model number : STEP80
– Tophandle jigsaw with a new powerful 700 watt motor
– 6-different speed settings for better cutting control
– Better ergonomic design with integrated soft-grip
– Dust extraction port -
MITRE SAW – 2000W 254MM
Model number : PS 254 L
Internal fan that removes 80% of the dust
Cut line visibility – Adjustable LED and laser
Blade depth adjustment. Allows for trenching application
Mitre lock with detent plate. Mitre: 50 left or right -
NAVIGATOR GASOLINE GEN 3.2KW 6.5HP 23L
NAVIGATOR GASOLINE GEN 3.2KW 6.5HP 23L
Navigator NG3500E2
Gasoline Generator 3.2 KW- Navigator NG3500E2Navigator Generator NG3500E2 is a cost-effective electric generator for your home or small business.
-
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
NORDICA 4.185 TURBO ACD 230-400V (NORDIKA) MMA AC
Welding Machine MMA Turbo ACD 230-400V – Telwin NORDICA 4.185MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with electrodes: rutile.
Complete with MMA welding accessories -
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
NORDIKA 3250 ACM 230V-400V MMA WELDING MACHINE
Welding Machine ACM 230V-400V MMA – Telwin NORDIKA 3250MMA stick electrode welding machine in alternating current (AC).
Stepless regulation of welding current.
With thermostatic protection.
Use with a wide range of electrodes: rutile.
Complete with MMA welding accessories. -
OLEOMAC BRUSH CUTTER 1.0HP
Oleomac Brush Cutter 1.0HP
Sparta 250T
Lightweight brushcutters
– Power/Displacement 1.0 HP – 0.8 kW/25.4 cm³
– Cutting components 130 mm dia. Tap&Go head with 2.40 mm dia. line – 255 mm dia. disc with 3 blades
– Dry weight without cutting tools 6.2 kg -
OLEOMAC BRUSH CUTTER 2.0HP 0.60L 26MM BLADE
OLEOMAC BRUSH CUTTER 2.0HP
H series brushcuttersBCH 40 T / BCH 400 T
– Power/Displacement 2.0 HP – 1.5 kW/40.2 cm³
– Dry weight without cutting tools 8.1 kg (40 T) – 8.2 kg (400 T) -
OLEOMAC BRUSH CUTTER 2.1HP
Oleomac Brush Cutter 2.1HP
OM 741
Professional brushcutters
– Power/Displacement 2.1 HP – 1.6 kW/40.2 cm³
– Cutting components 130 mm dia. Load&Go head with 3.00 mm dia. line – 255 mm dia. disc with 3 blades
– Dry weight without cutting tools 7.9 kg
Product Categories
- Power Tools
- Power Generators
- Garden Equipment
- Welding Equipment
- Garage Equipment
- Pumps
- Waterproofing Solutions
- Cleaning Equipment & Solutions
- Professional Hand Tools
- Air Compressor
- Construction Equipment
- Measuring Equipment
- Safety Equipment
- Cutting & Bending Machines
- Ladders
-
- Wheels
- Wood Care
- Spray Paint
- Tapes and Sealant
- Mixers and Paddles
- Automatic Gate Opener