EMUL PAR MEMBRANE EM300 10M 3.5MM RED

EMUL PAR MEMBRANE EM300 10M 3.5MM RED
Bituminous Membranes Membrane APP Modified Bituminous Membranes

BASIC INFORMATION
• They can be adhered to Emülzer C or Emilkote primed surfaces by torch application. First coat membranes must be adhered solely at overlaps, and second coat membranes must be adhered to the first coat membrane as well as the overlaps. Note that the surfaces are not primed in packaging applications.
• At seams they should overlap 10 cm horizontally, and 15 cm vertically. For ease of use, overlap points are marked on Emülzer membranes.
• Bituminous membranes must be applied at least in two coats and zigzagging (must be 50 cm horizontally and 5 meters vertically).

EM 300 PAR SLATE COATED BITUMINOUS MEMBRANES
3mm thick, red or green slate stone coated membranes reinforced with polyester felt.

USAGE AREAS
Used as the top coat membrane on metal surfaces with no UV exposure and foot traffic.

ADVANTAGES
As a light material, there is no load problem for the roof. Very decorative with its natural stone coating.